Moser Rex Power 1230 15W

Would you like to cut your pet's hair in the comfort of your own home? The Moser Rex Power 1230 dog groomer makes grooming your four-legged partner a breeze. The device works very quietly, so it is suitable even for nervous animals. The MultiClick system offers you 5 positions for adjusting the cutting length from 0.1 to 3 mm. The package also includes 2 extensions for cutting lengths of 6 and 9 mm. The machine has a stainless steel professional cutting blade with extra long life, so it won't break easily. Together with the Moser Rex Power 1230 dog groomer, you will also receive a cleaning brush, oil and a handy guide.

Key features of the Moser Rex Power 1230 15 W dog clipper

• With the Moser Rex Power 1230 dog clipper you can cut your pet's hair at home
• It works very quietly, so it is also suitable for nervous animals
• Offers you 5 positions for adjusting the cutting length from 0.1 to 3 mm
• The package also includes 2 attachments for cutting lengths of 6 and 9 mm
• Features a stainless steel cutting blade with extra long life
• Together with the Moser Rex Power 1230 dog groomer you will also receive a cleaning brush, oil and a guide

Warning:
For your own protection, please note the following warnings when using electrical equipment:
- Connect the device to AC voltage only. Observe the rated voltage indicated on the type plate.
- Never touch an electrical appliance that has fallen into the water. Unplug it immediately.
- Never use electrical appliances in the bath or under the shower.
- Always put away electrical appliances or. store them in such a way that they cannot fall into the water (e.g. in the sink). Avoid contact of electrical equipment with water and other liquids.
- Disconnect the appliance from the mains before cleaning.
- Never leave the device unattended when children or disabled persons are near it.
- Use the device only in accordance with the purpose described in this manual.
- Use only the accessories recommended by the manufacturer.
- Never use the device with a damaged cable or power adapter. Also, do not use it if it does not work properly, if it is damaged or if you drop it in the water. In these cases, send it to our service centre for inspection and repair.
- Do not hold the unit by the power cord when carrying it and do not use the cord as a handle.
- Protect the mains cable from warm (hot) surfaces.
- Do not use the device or. Do not store with a twisted or kinked cable.
- Never stick or let any object fall into the holes on the device.
- Never use the device in an environment where aerosols (sprays) are used or where oxygen is released.
- As a protection against injury, we recommend that you do not use the device if the cutting block is damaged.
- The instrument has protective insulation and is suppressed

Use:
- Oil the cutting block.
- Plug into the mains.
- Switch the device on with the on/off button, switch the device off after use.

Setting the cutting length:
- Without the adjustable comb, the device is set to normal cutting, approx. 0.1 mm.
- The cutting length can be adjusted (also during cutting) from 0.1 to 3 mm.
- Slide the fixer downwards.
- The side lever can be used to adjust the length of the cut with 5 presses (MultiClick).
- By moving the fixator upwards, the set mechanism is released and the cut length is adjusted again to approx. 0.1 mm.

Cutting with retractable comb:
Depending on the desired cut, the device can be used with or without a retractable comb.

Setting/composition of retractable comb:
- Slide the comb onto the cutting block in the direction of the arrow until it reaches the stop.
- You can fold the comb by moving it in the direction of the arrow.

Cleaning and maintenance of the device:
- Do not immerse the device in water!
- After each use, fold up the comb and the cutting block and use a cleaning brush to remove any remaining hair (hairs) from the opening of the device and the cutting block.
- Clean the device only with a soft or slightly damp cloth. Do not use solvents or abrasive substances!
- For good and long-lasting cutting performance, it is important to oil the cutting block frequently (1 × daily). For this, use only shearing block oil, vol. č. 4005-7000 (118 ml).
- You can order the oil for the cutting block as well as the hygiene spray via the dealer.
- If the cutting performance decreases with prolonged use and regular cleaning and oiling, you should replace the cutting block.
- The comb also serves as a knife guard.

Changing the cutting block:
- Switch the device off using the on/off button.
- Disconnect the appliance from the mains.
- Loosen the 2 screws located on the cutting block, remove the comb and blade.
- When reversing the positioning, adjust the comb and blade as follows:
1, Set the cut length fixer and the adjustment lever to the shortest cut length.
2, Place the blade using the groove on the artificial guide component (wedge-shaped), press down and backwards so that the driving protrusion fits into the blade hole.
3, Put the comb on top and put back the 2 screws as well.
4, Before that, before you tighten the screws, adjust the cutting comb so that, so that there is a distance of 0.5 - 1.0 mm between it and the blade. This distance must be maintained even if you are doing a thorough cleaning of the cutting block.
- Tighten the 2 screws.

Disposal in EU countries:
The appliance must not be disposed of with household waste. Under the EU directive on the disposal of electrical and electronic equipment, you can dispose of your device free of charge at municipal collection points or eco-yards. Proper disposal serves to protect the environment and prevent potential harmful effects on humans and the environment.