Freestyle roller skates TEMPISH VIBER L. E. 90 are suitable for beginners as well as for experienced skaters with medium to wide feet. The skeleton of the skate is well ventilated, ventilation reaches the foot thanks to the holes on the bottom of the shoe and the ventilated liner, which contains holes all around its perimeter, including the tongue. In the joint of the skate is used a bolt with a special nut and washer, thanks to which the cuff is replaceable and can be tightened if necessary, in addition to guaranteeing the skate more durability than the classic joint rivet.
Top self-locking buckle of Tempish VIBER L skates. E. The 90 is metal and the belt slides into the skeleton to prevent it from catching on the other skate during slalom and freestyle. The ankle strap is equipped with a one-stage micro-cut with a ratchet system that allows for very comfortable tightening and loosening. The plastic protectors on the outside of the skates are replaceable. The shoelace holes are fitted with strength metal rings that protect the shoelace and make it easier to tighten. Thanks to the 10 mm waxed laces, the laces can be tightened more easily and efficiently over time, ensuring a tight closure of the skate skeleton around the foot.
The liner of the skate is reinforced with PVC in the back and in the toe area it is supplemented with elastic neoprene for increased comfort. The TEMPISH logo strap on the back of the bag makes it easy to carry. In the Achilles tendon area, the liner is lowered and shaped into a V-shape, which improves maneuverability and mobility during freestyle riding. The cut-outs in the ankle flexion area are stitched with elastic neoprene, thanks to which the liner better respects the anatomy of the foot while maintaining its rigidity. To strengthen the position of the liner in the skeleton, it is equipped with a loop for the first row of laces. The lower part of the liner is a material that sticks better to the skeleton and is less slippery. Inside the shoe is an anatomical insole with a thickness of 3 mm, which is comfortable enough without being too soft.
In the heel area under the liner, a TPR silent block absorbs vibrations and shocks. It is quite strong, but at the same time soft and comfortable. The tongue of the liner is sufficiently stiff and strong, it consists of two parts and thanks to that it follows the foot perfectly. Thanks to the use of a tightening rubber, it holds its position well. Chassis, made with CNC technology, has a spatial design, is heavily reinforced, very solid, stable and accurate This is TEMPISH's own design and construction. It is attached to the shoe by two central screws and allows adjustment in both lateral and longitudinal directions. The hollow 8 mm diameter lugs are used to reduce weight and are mounted on the inside of the left skate and on the outside of the right skate to prevent them from loosening during riding.
Chassis mounting dimensions:
165 mm
The deposits:
ABEC-9 chrome with rubber dust cover for easy cleaning and maintenance
Carriage size (wheel spacing):
247.5 mm
Ball:
PUC, SUPER HI-REBOUND 4*90 × 24 mm
Inner liner length:
28,3 cm
Inner material:
Fine Nylon, absorbent microfiber
In-line chassis:
CNC construction extra reinforced, one piece, laterally and longitudinally adjustable
Maximum load:
100 kg
Sports load capacity:
4
Tempish s.r.o., bratří Wolfů 495/16, 779 00 Olomouc, CZ, [email protected], +420 585 313 377
Specifications can be changed without notice. Images are for illustrative purposes only.
