Vivotek FD8134V

Very small and easy to install IP camera with outdoor housing in the making Vandal treatment, which protects the camera from destroying all thieves. Its advantage is Night shooting with a sensitivity of 0 lux and promotion of advanced compression H.264 , Which saves storage space and provides a better quality recording. In addition, it supports the popular output formats, MPEG-4 or MJPEG. It thus provides the best features for monitoring outdoor areas 24 hours a day.

IP camera transmits multiple streams simultaneously Which may be in different resolution or compression. This is useful, for example, a computer or a monitoring center and the second stream for access from a mobile phone . For the record always reliably taken, the camera reveals tampering . When masking, rotation or other unauthorized changes can set the instant information.

The camera focus exactly on the desired place thanks 3osému mechanism . Power over Ethernet ( PoE 802.3af ) Offers the possibility of installing cameras only a single cable. This greatly simplifies installation and reduces costs. For direct deposit record has a slot for a card Micro SDHC . Besides offering these IP cameras connected input devices such example may be an additional sensor.

Specifications:

Design:
Outdoor (IP66)
Vandal resistant design (IK10)

Image capture:
Sensor: 1/4 "CMOS
Resolution: 1280 x 800 pixels (up to 30 frames/s)
Sensitivity in day mode 0.3 Lux
Sensitivity in night mode: 0 Lux
Parameters shutter 1/5 ~ 1/25000 s, AGC, AWB, AES
Video compression: MJPEG, MPEG-4, H.264, Multistreaming
Features: Day/night feature, sensitive to IR illumination, built-in mechanical IR-cut filter
Built-in illumination: IR LED (10 m)

Lens:
f = 3.6 mm
F = 1.8
Horizontal angle: 56 °
Vertical angle: 41 °

Special Features:
Micro SD/SDHC slot
3-axis mechanism for manual shooting
Access from mobile phones
Adaptive streaming for dynamic frame rate control
Tamper Detection
Privacy Masking

Sound:
Not available

Network protocols:
IPv4, IPv6, TCP/IP, HTTP, HTTPS, UPnP, RTSP/RTP/RTCP, IGMP, SMTP, FTP, DHCP, NTP, DNS, DDNS, PPPoE, CoS, QoS, SNMP, 802.1X

Consumption:
about 4.5 W
PoE 802.3af

Interface:
1x alarm input for connecting external devices (such as PIR sensor, door contact)
1x RJ-45 (10/100 Mbps) (PoE 802.3af)
1x Micro SD/SDHC/SDXC slot

Dimensions:
133 x 94 x 133 mm

Weight:
about 623.5 grams

Operating temperature:
0 ° to 50 ° C

Packing:
IP camera FD8134V
CD with user manual and supporting software
Free applications ST7501 up to 32 channels
Installation Guide
Warranty conditions
Power adapter
Installation Kit (RJ-45 connector, screws, sticker for easy installation)