APC Smart-UPS X 3000VA LCD

The APC Smart-UPS X 3000VA variable rack/power system provides protection against power surges, current shocks, spikes, short circuits and other power irregularities. With Boost and Trim (AVR), higher gain or high voltage corrections are available without unintentional battery discharge. Intelligent management and accurate charging of the battery maximises its life, reliability and performance. Regular testing ensures timely detection of the necessary battery replacement. You can also replace the battery while operating the unit without switching it off. An advantage of this product is also the support for extended battery life via additional batteries.

When the UPS is powered off and the power is restored, the connected devices are automatically started. Drive management is solved using a network (eg using the optional AP9630 ) or USB interface. The unit contains state-of-the-art status indicators that display all important events. Acoustic warnings inform the user when the unit is powered by the battery, if the battery is almost exhausted or when the battery is overloaded.

Parameters and Specifications:

Exit:
Maximum adjustable power: 2700W / 3000VA
Rated output voltage: 230V
Efficiency at full load: 98%
Output voltage distortion: Less than 5% at full load
Output Frequency (Sync with Network): 47 - 63 Hz

Output Connections:
8x IEC 320 C13
1x IEC 320 C19
2x IEC Jumpers

Input:
Rated input voltage: 230V
Input frequency: 47-63Hz
Cable length: 1.83m
Input voltage range for grid power supply: 141-255, 160-280V
Other input voltages: 208, 220, 240
Switching time: 2-4ms

Input connection:
IEC-320 C20
Schuko CEE 7 / EU1-16P
British BS1363A

Battery and run time:
Battery type: maintenance-free lead-sealed battery with suspended electrolyte (not flowing)
Typical charging time: 3h
Replacement battery: APCRBC117
Number of battery modules: 1
Time extension options ( SMX120RMBP2U )
Run time display : Display graph (curve A) / runtime display

Communication and administration:
Port interface: RS-232, SmartSlot, USB
Amount of SmartSlot bay interfaces: 1
Control panel: luminescent diodes display status / power supply from battery / battery / battery / overload / multifunction LCD status and control console
Audible Alerts: battery status / clear low battery / adjustable time warning
Emergency shutdown: yes

Overvoltage protection and filtration:
Shock Energy: 645J
Filtration: continuous multipole noise filtration / IEEE surge arrester 0.3% / zero key response time / corresponds to UL 1449

Design:
Black Colour
Stand height: 2U
Dimensions: 85 x 432 x 667mm (H x W x D)
Net weight: 37.32kg

Packaging includes:
Software CDs, rack mount brackets, Smart UPS RS-232 signalling cable, USB cable, user guide