D-Link DGS-1210-10P

The D-Link DGS-1210-10P is a part of the D-Link Web Smart Switches' 3rd Generation that integrates advanced management and security features, high performance and scalability.
The device features an innovative design without an internal fan, which ensures quiet operation and longer life. All these features make the DGS-1210-10P a complete and cost-effective solution for small and medium businesses.

This switch has 8 PoE ports. These ports provide up to 30W for 2 ports, 15.4W for 4 ports, or 7.5W for 8 ports. This allows you to power 802.3af/pre-standard devices such as network cameras and IP phones as well as 802.3at devices such as 802.11n access points from the switch. A unique switch feature is programmable PoE power supply so devices connected to PoE ports can be switched-off at a certain time to conserve the power.

The innovative features of the D-Link Safeguard Engine protect the switch from overflow by unwanted traffic caused by virus attacks. In addition, the switch supports access control lists (ACLs) and 802.1X port authentication via external RADIUS servers. The IP-MAC-port link allows the administrators to track the location of IP addresses by linking the source IP address to the appropriate MAC address and source port. To further increase security, DHCP Server Screening1 is available to filter pirated DHCP server packets from user ports to prevent unauthorized IP address allocation.

The D-LINK DES-1210-28P is great companion when it comes to deploying VoIP because it supports Auto Voice VLAN and QoS Differentiated Services Code Point (DSCP) for VoIP applications. Auto Voice VLAN will automatically transfer voice traffic from the IP phone to the assigned VLAN to improve the operation of VoIP services. With higher priority and dedicated VLAN, this feature guarantees high-quality and secure VoIP traffic. DSCP refers to the IP packet part, allowing different service levels to be assigned to the network traffic. By using bandwidth control, the network administrator can reserve a certain bandwidth for important features that require higher bandwidth or higher priority.

The switch features a full set of L2 features including IGMP Snooping, Port Mirroring, Spanning Tree, and Link Aggregation Control Protocol (LACP). Network maintenance features include Loopback Detection and Cable Diagnostics. Loopback Detection is used to detect loops created by a particular port and automatically disconnects the affected port. Cable diagnostics are used by network administrators to quickly test the quality of metallic cables as well as determining the type of cable defect.

The D-Link DGS-1210-10P will delight its owner with SmartConsole feature, which allows administrators to easily locate several D-Link Web Smart switches in the same L2 network segment: switches are displayed on the screen and can be accessed immediately. With this utility, it's easy to configure the default Smart Switch settings, so users do not need to change their PC's IP address. With the switches found, it is also possible to make extensive changes to the configuration settings, including password changes and firmware upgrades.

Parameters and Specifications:

Interface:
8 x 10/100/1000Mbps Gigabit Ethernet port
2 x SFP

Power over Ethernet (PoE):
30 W (max.) on ports 1-8
30 W (max.) on 2 ports or 15.4W (max.) on 4 ports or 7.5W (max.) on 8 ports
Maximum total input power: 78W
Time-dependent PoE

Performance:
Switching power: 20Gb/s

Safety:
ACL by MAC/IP Address (ICMP/IGMP/TCP/UDP), VLAN ID, 802.1p Priority, or DSCP
802.1X RADIUS authentication support
DHCP Server Screening1
ARP Spoofing Prevention1
D-Link Safeguard Engine

VLAN:
802.1Q VLAN Tagging
Max. 256 static VLAN groups
Max. 4094 VID (VLAN Identifier)
VLAN Management
Asymmetric VLAN
Auto Voice VLAN

Quality of Service (QoS):
802.1p priority queues, 4 queues per port
Port-based bandwidth management (64kbps)

Traffic Control:
802.3x Flow Control
Port mirroring
Broadcast/Multicast/Unicast Storm Control
802.3ad Link Aggregation (up to 8 groups, 8 ports per group)
IGMP Snooping (v1/v2)

Configuration:
Web User Interface
SmartConsole utility
Command Line Interface (CLI) over Telnet
Supports network management with D-View SNMP

D-Link Green:
Power save mode for unplugged ports
Cable length detection
Design without internal fan