EATON 5P 1150i IEC
Installment calculator
4,9%
interest
from 12.46 € monthly
EATON 5P 1150i IEC
The 5P UPS is suitable for protecting servers, stations and network elements.With a power of 1150, VA/770 W will provide a sufficiently long power supply in the event of a power failure. It also provides protection against surges and current fluctuations which happen from time to time. The front LCD displays of this UPS provides status information in 7 languages and makes it easy to set up using the buttons. The model can handle 8 devices using IEC sockets. There is also a USB port and a serial port. Additionally, it has a plug-in position for the communication adapter.
The power source achieves up to 98% energy efficiency , reducing energy costs. Longer battery life is provided by the Eaton ABM battery management technology, which uses a modern three- stage charging technology and charges the battery only when needed. This increases battery life by up to 50%. Thanks to the hinged lid, replacing the battery is an easy task and can be replaced while the device is running without disconnecting it.
Parameters and Specifications:
Performance:
1150 VA/770 W
Technology:
Interactive High Frequency (pure sinusoid, increase and decrease of voltage)
Connections:
8x socket with overvoltage protection
Characteristics:
Input voltage: 160 V - 294 V (adjustable to 150 V - 294 V)
Output voltage: 230 V (adjustable to 200 V - 208 V - 220 V - 230 V - 240 V)
Frequency: 50-60 Hz automatic detection
Battery:
Message: battery test, replaceable, deep discharge protection, ABM and temperature compensated charging matrix (optional)
Typical Backup Times: 12/7 minutes (50/70% load)
Interface:
1x USB 2.0
1x Serial port (RS-232)
1x slot for Network-MS, ModBus-MS or Relay-MS
Model:
Tower (stand-alone)
Dimensions:
230 x 150 x 345 mm
Weight:
11.1 kg
Specifications
Performance
Efficiency
Backup time
Power outlet type
Output type
Dimensions
Weight
Eaton Industries (France) SAS, 110 Rue Blaise Pascal - 38330 Montbonnot Saint-Martin - France, [email protected]
Specifications can be changed without notice. Images are for illustrative purposes only.
