BISON EPOXY METAL 24ml

High-strength, highly durable epoxy adhesive BISON EPOXY METAL has a metallic colour and a working time of 45 minutes. It is especially suitable for metal objects that require resistance to extreme conditions – such as chemicals, vibrations, or seawater. It's also suitable for bonding wood, chipboard, thermosets, hard PVC, laminates, ceramics, porcelain, glass, concrete, stone, marble, rubber, expanded polystyrene, and some plastics (Formica, polyester, Bakelite), both to themselves and to each other. It is not suitable for bonding PP, PE, Teflon, or silicone.

Instructions for use and storage:
Working temperature is +5°C to +35°C. The parts to be bonded must be clean, dry and degreased. Remove the silver cap between the plungers. Break off the end of the nozzles. Dispense a sufficient amount and mix well until you get a uniform colour. The open working time is 45 minutes. Apply the adhesive to one side, or to both sides for rough and porous materials, press both surfaces together and fix them in place (using clamps or tape). Clean the ends thoroughly and close (the cap must be broken off from the dual syringe plungers). Store in a cool, dry place.

Safety warning:
Keep out of reach of children. Irritating to skin. May cause an allergic reaction. Causes serious eye irritation. Avoid breathing vapours. Wear protective gloves/eye protection/face protection. Toxic to aquatic life with long-lasting effects. If medical advice is needed, have product container or label at hand.
IF ON SKIN: Wash with plenty of water and soap.
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.