BISON EPOXY REPAIR AQUA 56g

BISON EPOXY REPAIR AQUA is a high-quality, very strong and hard two-part epoxy adhesive putty. It is specially designed for extreme, permanent repairs in damp environments and underwater. It glues, seals and fills cracks and holes in concrete, wood, metals and plastics. Suitable for repairing fittings, pipes, radiators, water tanks, swimming pools, weights, toilets, etc. It is not suitable for bonding materials such as PP, PE, PTFE and silicones. The adhesive putty does not deform, rust, and is resistant to chemicals and temperatures from -20°C to +120°C. It can be machined, drilled, milled and sanded, and painted over after hardening.

Instructions for use and storage:
The surfaces to be bonded must be clean and degreased. Cut off the required amount of putty and remove the protective film. Knead the putty until it is a uniform colour. Work the putty firmly into the repair site. To make it easier, work with moistened fingers to prevent the putty from sticking to them. The putty is workable for 3–4 minutes, depending on the temperature. It reaches handling strength after 7–10 minutes. It can be machined, drilled, milled, sanded and painted over after 60 minutes. It reaches functional strength after 24 hours at room temperature. The minimum working temperature is +15°C. Store in a cool, dry place.

Safety warning:
Keep out of reach of children. Causes skin irritation. May cause an allergic skin reaction. Causes serious eye irritation. Avoid breathing vapours. Wear protective gloves/eye protection/face protection. Toxic to aquatic life with long-lasting effects. If medical advice is needed, have product container or label at hand.
IF ON SKIN: Wash with plenty of soap and water.