Dobry den, lze timto lepidlem slepit sklenenou polici v lednici, ktera bude nasledne zatezovana? Dekuji.
PATTEX One for all Universal 80 ml
Putty Flextec polymer-based adhesive with high elasticity and high final strength 50 kg /cm2, colour white
Show full description
Buy with code
ALZADNI20
3.67 €
Amazing Deal
4.59 €
Save 5.11 €
Shop faster with pickup at AlzaBox or in-store.
Warranty 24 months
Code:
DOMA085
Producer's Website:
PATTEX One for all Universal 80 ml
4.59 €
In stock > 20 pcs
Buy
PATTEX One for all Universal 80 ml
PATTEX One For All UNIVERSAL is a flexible mounting adhesive and sealant for interior and exterior use with a FlexTec formula. It is characterised by its high final strength and joint elasticity. Once cured, the joint is paintable, sandable and resistant to UV radiation, heat and vibration. The adhesive is designed for bonding and sealing most absorbent and non-absorbent materials, such as brick, ceramic, concrete, fibreboard and chipboard, plasterboard, plywood, natural stone (min. thickness 10mm), MDF, wood, metal, rigid PVC, polystyrene, glass, plastics and painted surfaces.
Key Features of PATTEX One for All Universal Sealant, 80ml
- Transparent mounting adhesive and sealant based on Flextec polymer
- High final strength of 50kg/cm²
- Suitable for exterior and interior use
- Fast curing
- The joint is paintable, sandable and resistant to UV radiation, heat and vibration
- Also suitable for sensitive and transparent materials
- White colour
Instructions for use:
The surface to be bonded must be clean, dry and completely free of grease. When using a cartridge, cut off the tip of the cartridge above the screw thread, screw on the plastic nozzle and cut it at an angle. Then insert the cartridge into the gun. Apply the adhesive to one of the surfaces:
1. In dots, to smooth out uneven surfaces
2. In a wavy line for higher initial adhesion
3. For wider surfaces, or in straight lines for smaller surfaces
4. For outdoor use, apply vertical strands.
Remove any adhesive residue immediately with a damp cloth. Cured material can only be removed mechanically.
Volume:
80ml
Warning:
Not suitable for bonding materials such as PE, PP, PTFE, acrylic glass, copper, brass and plasticised PVC. This adhesive is not suitable for materials that are permanently submerged in water.
Specifications
XXL balení
Type
Application area
Suitable for
Application
XXL pack
XXL balení
Type
Type
Application area
Suitable for
Application
Features
Connection type
Colour
Colour
Packaging
Type of packaging
Volume
Usage
Usage
More Specifications
Henkel AG & Co. KGaA, Henkelstraße 67, 40589, Düsseldorf Deutschland, [email protected], +49 211 7970
Note:
Specifications can be changed without notice. Images are for illustrative purposes only.
