Würth Chemical grout WIT-VM 250, 300 ml
Würth Chemical grout WIT-VM 250, 300 ml
Key features of Würth WIT-VM 250, 300ml chemical injection mortar
- Universal solution for anchoring in concrete, masonry and post-installed rebar connections
- Two-component resin mortar, styrene-free vinyl ester
- Single anchor point for cracked and non-cracked concrete, seismic class C1
- Anchor rod W-VI-A, anchor rod W-VD-A, standard threaded rod with 3.1 certificate – Single anchor point for masonry (with WIT-SH perforated sleeve system)
- WIT-SH perforated sleeve, WIT-AS anchor rod, WIT-IG internal thread sleeve – Single anchor point for masonry (with SH perforated sleeve system)
- SH perforated sleeve, W-VI-A anchor rod, W-VI-IG internal thread anchor, standard threaded rod with 3.1 acceptance test certificate
- Post-installed rebar connections
- Anchoring in cracked and non-cracked concrete, solid or hollow brick masonry, aerated concrete and for post-installed rebar
- Suitable for installing metal structures, metal sections, wooden structures, brackets, grilles, pipes, cable ducts, etc.
- Grey colour
Use:
The 330ml and 420ml cartridges can be used until the expiry date – just replace the mixing nozzle or close with the sealing cap.
Suitable application gun:
Cordless application gun 420ml, MULTI application gun, WIT 420ml application gun, pneumatic application gun 420ml, EasyMax 420ml, HandyMax 420ml, WIT 330ml application gun, MULTI application gun, silicone application gun 310ml
Min./max. processing temperature / conditions:
-10°C to 40°C / temperature in the anchor base during processing and curing
Min./max. ambient temperature / conditions:
-40°C to 120°C / after the complete curing process
Long-term temperature resistance max.:
72°C
Short-term temperature resistance max.:
120°C
Proof of performance:
European Technical Approval ETA-12/0164: Single anchor point + cracked and non-cracked concrete (W-VD-A anchor rod, standard threaded rod with 3.1 acceptance test certificate), seismic performance category C1
European Technical Approval ETA-13/1040: Single anchor point + solid and perforated block masonry, autoclaved aerated concrete (WIT-SH perforated sleeve, WIT-AS anchor rod, WIT-IG internal thread insert, autoclaved aerated concrete only with WIT-SH 18x95 perforated sleeve)
European Technical Assessment ETA-16/0757 and ETA-20/0854: Single anchor point + solid and hollow brick masonry, aerated concrete (SH perforated sleeve, W-VI-A anchor rod, W-VI-IG internal thread anchor, threaded rod with 3.1 acceptance test certificate, aerated concrete only without perforated sleeve)
European Technical Approval ETA-12/0166: Post-installed rebar connections, only 330ml, 420ml and 825ml cartridges
EPD: Environmental Product Declaration according to ISO 14025 and EN 15804+A2, EPD-AWU-20230406-CBA3
Please note:
We recommend using the Würth Technical Software for planning and dimensioning the installation.
Specifications
Features
Würth, spol. s r.o., č.p. 137. Nepřevázka 293 01, +420 323 041 141, [email protected]
Specifications can be changed without notice. Images are for illustrative purposes only.
