MEVA BRI TB01005P piezo

Infrared tThe eplometer with ceramic burner MEVA BRI TB01005P is suitable for heating work areas. It is equipped with an adjustable multi-purpose holder, a safety lock, a two-position power regulator as well as accessories in the form of a 30 mBar gas regulator and approx. 0.5 m gas hose. The thermometer has a piezoelectric ignition, which is used to simply ignite the gas at the push of a button - by striking the piezoelectric crystal, a spark is created that ignites the gas.

Technical parameters:
Output power: 4,2 kW - 50 mbar, 3,45 kW - 30 mbar (supplied with 30 mbar)
Consumption: 306 g/hr - 50 mbar, 250 g/hr - 30 mbar
Weight: 2.2 kg
Designed for connection to 5kg and 10kg propane-butane cylinders (for 2kg cylinder can only be used with 2156UV, 2156UVB pressure relief valve)
Dimensions (w × h × h): 280 × 100 × 240 mm
Estimated endurance - PB bottle 2 kg: 8 h
Expected endurance - PB bottle 5 kg: 20 h
Expected endurance - PB bottle 10 kg: 40 h

Safety Alert:
In case it is not possible to use piezo ignition, follow the instructions, see fig. Never light through the air intake opening!

The unit consumes oxygen during operation and is not allowed to be used in unventilated enclosed rooms. The devices are designed for defrosting, drying and tempering rooms in non-residential buildings, in an open or sufficiently ventilated space.

The unit is not intended for permanent heating. The combustion gases remain in the space of the heated room and therefore sufficient ventilation must be provided. The unit must not be used in areas below ground level (cellars, basements, etc. ) Use in these areas is only possible for short periods of time and only if forced ventilation is provided and a safety alarm device is used.