Olympia A 350 Combo

Lamination of A4 or smaller documents

The Olympia A 350 Combo Laminator will be ready for lamination quickly as it takes approximately 3-5 minutes to heat up. The machine can laminate documents of A3 size or smaller (infeed width 330 mm) and up to 80-125 micron film thickness at a speed of 250 mm/min. The Olympia A 350 Combo can laminate a single piece of paper in approximately 1 minute and 12 seconds. Using the machine itself is very simple, just plug the laminator into a power outlet, turn it on with the switch on the right side and just wait for the Olympia A 350 to light up the green READY light to notify you that it has finished heating up. Then just insert the laminating film with the document into the input slot. The Olympia A 350 automatically pulls it in and a laminated document comes out the other side.

Olympia A 350 Combo offers interesting features

With the Olympia A 350 Combo, you can also perform cold lamination by activating the switch on the right side of the device (move to COLD). To ensure smooth and safe operation, the Olympia laminator has overheat protection. If the maximum temperature is exceeded, the device will automatically switch off. Thanks to the use of a quality heating system, no bubbles are formed during lamination. You may accidentally jam the film (when inserted crookedly or when inserting a crumpled film), and this is exactly what you use the Jam release function for. Use this to release the accumulated film and simply pull it out of the machine. A 1.4 metre power cord ensures easy use of the laminator, so you won't need to use extension cables. The Olympia A 350 Combo also includes 15 laminating films (3× A4, 4× A5, 4× A6, 4× 95 × 60 mm business card). After unpacking, you can test the laminator immediately.

Olympia A 350 Combo has an integrated cutter

With the help of the cutter you can cut up to 3 sheets with a standard weight of 80 g/m2 at a time. You then place the paper under the pressure bar of the Olympia A 350 Combo laminator and start cutting. The transparent bar reliably holds the currently cut paper. A ruler with a scale in centimetres (1 mm resolution) and inches (1/10" resolution) is also applied to the bar. The total range of this ruler is 0-32 cm or 0-12.5 inches. The 320 × 85 mm cutting surface of the Olympia A 350 Combo laminator features several guides to ensure more precise cutting:

• ruler - perpendicular to the cut, on both sides of the cutting surface with a scale in centimetres (resolution 1 mm, range 0 - 8.5 cm) and in inches (resolution 1/10", range 0 - 3.3")
• protractor - with 15° scale
• grid - 1×1 cm squares across the cutting surface