Prusa INDX 8-Tool Conversion Kit for CORE One/+
Installment calculator
4,9%
interest
from 21.16 € monthly
Prusa INDX 8-Tool Conversion Kit for CORE One/+
Prusa INDX 8-Tool Conversion Kit for CORE One/+
Multi-material and multi-colour 3D printing for the Prusa CORE One+
With the Bondtech INDX for CORE One+, you can expand your Prusa CORE One/+ 3D printer to work with eight different filaments simultaneously, thanks to automatic switching between individual print heads. This is a conversion kit designed for self-installation on a compatible Prusa CORE One/+ 3D printer; the printer itself is not included. This lets you print multi-coloured models, combine hard and flexible materials, or use soluble supports without creating a large amount of waste when changing materials. The Bondtech INDX for CORE One+ uses a separate print head for each filament, which eliminates the time-consuming process of switching materials in a single nozzle, resulting in faster, cleaner, and more efficient 3D printing. You can seamlessly combine PLA, PETG, TPU, carbon-fibre-filled materials, and engineering filaments. Thanks to the induction heating of the nozzles, the Bondtech INDX for CORE One+ achieves an exceptionally fast tool change in approximately 12 seconds, while retaining all the advantages of the CORE One+ printer, including high printing speed, an enclosed chamber, and compatibility with the PrusaSlicer, Prusa Connect, and EasyPrint ecosystem. This gives you professional multi-colour and multi-material printing with maximum efficiency and minimal waste.
Key features of the Prusa INDX 8-Tool Conversion Kit for CORE One/+ 3D printer accessory
- Designed for self-installation on a compatible Prusa CORE One/+ 3D printer; the printer itself is not included
- The Bondtech INDX for CORE One+ lets you work with up to eight different filaments simultaneously thanks to automatic print head switching
- Using a separate print head for each filament minimises waste when changing materials
- The Bondtech INDX for CORE One+ supports the use of nozzles from 0.25mm to 1.0mm
- Induction nozzle heating ensures print head changes in approximately 12 seconds
- The Bondtech INDX for CORE One+ supports a wide range of filaments including PLA, PETG, TPU, PVA, ABS, ASA, PA, and PCCF
- Durable high-flow CHT nozzles are also suitable for abrasive materials
- The Bondtech INDX for CORE One+ is fully compatible with PrusaSlicer, Prusa Connect, EasyPrint, and existing printer accessories
Multi-material printing with minimal waste
When changing materials, the INDX for CORE One+ uses only approximately 0.013 grams of filament. Thanks to the separate print heads, there's no need for extensive nozzle purging, and most of the material ends up where it should—in your model. Additionally, the advanced nozzle cleaning system automatically removes material residue, with the amount of waste being less than a grain of rice.
Up to eight filaments ready for immediate use
With the Bondtech INDX for CORE One+, you can have up to eight different filaments or print heads with different nozzle sizes ready at the same time. Just start your 3D print, and the system automatically selects the correct tool for that part of the model. This saves you time spent on constantly changing filaments and reconfiguring the printer, while letting you switch between different materials, colours, and nozzle sizes without limitations.
Retains all the advantages of the Prusa CORE One+ printer
The Bondtech INDX for CORE One+ expands the capabilities of your 3D printer without you having to give up the features you're used to. It maintains high printing speed, the enclosed chamber, and the intelligent ventilation system, so you can continue to print in optimal conditions. Full compatibility with PrusaSlicer software, the Prusa Connect service, and your existing accessories, filaments, and print profiles is a matter of course.
Induction heating ensures rapid print head switching
The Bondtech INDX for CORE One+ uses an intelligent induction heating system that can heat a nozzle from room temperature to printing temperature in just a few seconds. This means the individual print heads are always ready for immediate use, which significantly speeds up material changes during a print. Furthermore, once a print head is docked, the nozzle cools down quickly, preventing unwanted filament dripping or stringing.
Durable high-flow nozzles for demanding materials
With the Bondtech INDX for CORE One+, you get a simple and reliable system that won't limit your choice of materials or future setup expansion. The passive print heads, free of complex electronics, contribute to higher reliability and also enable you to easily add more tools according to your needs. Each print head is equipped with a durable 0.4mm high-flow CHT nozzle that can handle both standard filaments and abrasive materials with carbon fibre additives.
Automatic adjustment for different filament types
The intelligent extruder automatically adjusts the pressure of the feed gears according to the material being used. Whether you're printing with soft TPU or rigid engineering filaments with fibre additives, the Bondtech INDX for CORE One+ ensures optimal feeding without needing to manually adjust the extruder. This lets you easily switch between different materials within a single project and focus on creating models instead of spending time on lengthy printer tuning.
Works perfectly with the Prusa USS Drybox
The Bondtech INDX for CORE One+ supports the use of the Prusa USS Drybox system, which helps protect filaments from moisture and keeps them in optimal condition. This ensures that even sensitive engineering materials remain ready for immediate use without the need for additional drying. The result is more stable printing outcomes, higher model quality, and less hassle with material preparation before printing.
Specifications can be changed without notice. Images are for illustrative purposes only.
