Ubiquiti UniFi WiFi BaseStation XG
Ubiquiti UniFi WiFi BaseStation XG
The Ubiquiti UniFi WiFi BaseStation XG outdoor access point is a powerful device that provides reliable internet connectivity in crowded places such as music festivals, concerts, sports halls, etc. With three high-bandwidth 5 GHz radio sections, the unit can serve up to 1500 connected devices (recommended maximum is 750 client devices). Thanks to advanced 4×4 MU-MIMO technology, each radio part achieves modulation speeds of up to 1733 Mbps, while the signal strength and reliability is enhanced by advanced beamforming technology. The UniFi WiFi BaseStation XG features a dual adjustable antenna with 10 dBi gain at a 90° radiation angle and 15 dBi gain at a 50° radiation angle. Reliable data transfer over Ethernet is provided by a pair of ports (1×10/100/1000 Mbps, 1×1/10 Gbps IMC). The access point is powered by active POE 802.3bt, or you can use the included POE adapter (50 V / 1.2 A) with a gigabit port.
Key Features of the Ubiquiti UniFi WiFi BaseStation XG Outdoor Access Point
- Ubiquiti Access Point will provide reliable Internet connectivity in places with a higher concentration of people
- Three high-bandwidth, 5 GHz radio sections serve up to 1500 connected devices
- 4×4 MU-MIMO technology allows communication with up to 4 devices simultaneously
- Dual adjustable antenna with 10 dBi gain (at 90°) and 15 dBi gain (at 50°)
- Signal strength and network performance are enhanced by bamforming technology
- The UniFi controller software is used to control and set up the access point
- UniFi WiFi BaseStation XG is powered by active POE 802.3bt, or you can use a POE adapter (50 V / 1.2 A)
- The design of the unit can be easily adapted to the surrounding environment
- Includes a mounting kit for easy installation of the device on a mast or exterior wall
Easy control with UniFi controller software
To control the device and configure the network, you need to download the original UniFi controller software from the official website, which is completely free and without any restrictions. Using the UniFi controller, you can upload maps and set basic access point parameters such as SSID, guest account, and homepage. You can also quickly and easily view traffic statistics, list and status of connected clients and many other data.
UniFi WiFi BaseStation XG uses 4×4 MU-MIMO technology
With 4×4 MU-MIMO Wi-Fi technology that uses four antennas to transmit and four antennas to receive data, the UniFi WiFi BaseStation XG can communicate with up to four devices simultaneously. Dividing wireless capacity among multiple users increases network performance and data transfer speeds, which is especially useful in areas with many connected devices.
Ubiquiti BaseStation XG AP excels in easy installation
Easily install the Ubiquiti UniFi BaseStation XG access point on an outdoor pole or wall using the included mounting kit with brackets and screws. A new feature is the ability to install the device on standardized VESA mounts - holes for 75 mm and 100 mm pitches are available. In addition, the design of the unit, including the LED indicator, can be easily adapted to the surrounding environment so that the device is unobtrusive and does not attract unnecessary attention.
Package contents:
Access Point Ubiquiti UniFi WiFi BaseStation XG
PoE power adapter 50 V / 1.2 A
Power cable
Pole/wall mount
Set of screws
Specifications
Standards and frequency
Functions
Speed
Type
Security
Connectors
Antenna features
Advanced parameters
Number of LAN ports
Dimensions and weight
Package contents
PoE charging
Ubiquiti International Holding B.V., Ekkersrijt 3102. Son en Breugel, 5692 CC. Netherlands, [email protected]
Specifications can be changed without notice. Images are for illustrative purposes only.
