Vortice VORT HRW 60 MONO EVO HCS mini

Heat Recovery Unit for fresh and healthy air at room temperature effectiveness up to 89%, loudness 14,3dB(A) to 62,1 dB(A), max. air flow 10,01m3/h, standard length 35,6cm, diameter of 146mm, remote control, main advantage is sensor humidity, temperature, illumination intensity settings night mode
Buy with code ALZADNI15
689.24 €
  810.87 €
Vortice VORT HRW 60 MONO EVO HCS mini 810.87 € In stock > 5 pcs at the supplier's
Buy

Vortice VORT HRW 60 MONO EVO HCS mini

Vortice VORT HRW 60 MONO EVO HCS WiFi mini is a decentralized heat recovery unit. It is particularly suitable for installation in residential and commercial areas of new buildings or buildings renovated for energy efficiency. It is ideal not only for ensuring proper air exchange, but also for preventing excessive humidity in the room and the formation of mould on the walls. The maximum flow rate of the unit is 60 m³/s. The one-way remote control allows you to set parameters or display useful product information. Specifically, it allows: on/off;, choice of 5 operating modes, fan speed setting, selection of the relative humidity threshold, which activates Boost mode (three predefined levels adjustable to 60%, 75 % a 90 %), activation of "Night" mode and indication of filter saturation status.

Heat recovery unit Vortice VORT HRW 60 MONO EOV HCS WiFi mini

Key features of the recuperation unit Vortice VORT HRW 60 MONO EOV HCS WiFi mini

  • Construction of impact-resistant and UV-resistant plastic resin
  • Nominal diameter 160 mm
  • Ceramic heat exchanger with hexagonal cells - high heat exchange efficiency (up to 90% with minimum air flow)
  • Fan with high efficiency EC motor
  • Five operating speeds to maximize performance when needed or minimize noise and power consumption
  • Integrated relative humidity sensor
  • Two air filters, IsoCoarse 65% and a coarser dust pre-filter, both easily removable for cleaning
  • Mechanical system for rapid air outlet closure integrated into the product chassis.
  • The external rubber grille can be installed from the outside with screws or from the inside through a hole in the wall, without the need for scaffolding
  • Insect screen that can be inserted into the pipe from the inside of the room

Five different operating modes

Continuous heat recovery ventilation:the product cycles the air in and out of the room and recovers the energy stored in the heat exchanger
Ventilation with exhaust air only: Exhaled air is extracted from the room
Ventilation with supply air only: the product brings fresh air into the room
Automatic ventilation:the heat recovery unit automatically controls the airflow based on the relative humidity sensor readings
"Night" ventilation:when the light level in the room is reduced, the product automatically forces the fan to operate at minimum speed regardless of the relative humidity values detected

Specifications

Compare
Colour
White
Placement
Wall-mounted
Minimum wall thickness
285 mm
Maximum wall thickness
700 mm
Efficiency
89 %

Colour

Colour
White

Assembly

Placement
Wall-mounted
Minimum wall thickness
285 mm
Maximum wall thickness
700 mm

Efficiency

Efficiency
89 %
Minimum air flow
10.01 m3/h
Maximum air flow
59.99 m3/h

Features

Functions
Night mode
Sensor
Humidity, Illumination intensity settings, temperature
Heat exchanger material
Ceramics
Filter classification
G2
Minimum operating temperature
-20 °C
Maximum operating temperature
50 °C
Minimum Noise
14.3 dB(A)
Maximum loudness
62.1 dB(A)

Control

Control
Remote control

Dimensions

Diameter
146 mm
Installation hole
160 mm
Length
35.6 cm
Weight
3.3 kg
More Specifications
Note:

Specifications can be changed without notice. Images are for illustrative purposes only.

There are no posts in this discussion.
Accessories for Vortice VORT HRW 60 MONO EVO HCS mini

Related categories

Chcete doručit zboží do Česka? Prohlédněte si Vortice VORT HRW 60 MONO EVO HCS mini