CTEK MXS 10

In cold winter evenings, when the car battery is used a lot, a fully charged battery is a prerequisite for easy starting. This important component of the vehicle needs a quality charger. The product from CTek is a high performance charger with a microprocessor charging control. It has emergency power and recondition modes. Therefore your battery will be safe.

Key Features

• Stable charging current up to 10A
• To restore deeply discharged batteries
• Battery charger with 12V voltage
• Designed for batteries with a capacity of 14 to 200Ah, up to 300Ah (only for maintenance charging)
• Complies with protection class IP65
• Compact dimensions

Easy Connection

The package includes a connector with terminals for fast connection to the battery. It is especially handy for those who are looking for a solution that provides a quick and easy swap of different batteries, for example in a workshop. Its optimal cable length and colour always guarantees a faultless connection.

Under the Supervision of the Microprocessor

This universal battery charger is controlled by a microprocessor, and is equipped with patented eight-phase charging technology. When the charging is complete, the charger automatically switches to the maintenance status, thus avoiding overcharging and subsequent damage to the battery. The charger is designed for all 12V lead-acid batteries. Of course, you will like the Supply function, a power mode that provides power at the time between removing and re-connecting the battery. By disconnecting the battery from the vehicle, you risk losing all settings, including alarm codes, multimedia system and electronics that control the power of the vehicle. The charger is able to wake up even deeply discharged batteries with stratified electrolyte.

Warnings

• For charging in Recond mode, the battery must be disconnected from the wiring and charge the battery out of the car. This is a mode in which controlled electrolyte mixing is performed and the charger charges the battery at a higher voltage than other modes.
• Recond mode can not be used for Gel Electrolyte (AGM)
• It is recommended to use it only for deeply discharged batteries, where the electrolyte is deposited (bottom thicker, thinner above). This mode should be used once or twice a year.
• If it is not a maintenance-free battery and therefore has loose lids, it is necessary to leave the lids open while charging.

Additional information:

Battery types:
All types of 12V lead-acid batteries (wet, MF, Ca/Ca, AGM and GEL)

Dimensions:
197 × 93 × 49mm (L × W × H)

Insulation class:
IP65

Weight:
0.8kg