GÜDE Compressor 405/10/50
GÜDE Compressor 405/10/50
The GÜDE 405/10/50 compressor is a reliable compressor for use in domestic and craft workshops. The compressor is suitable for basic workshop work with compressed air and for short-term (or permanent) operation of pneumatic tools according to their air consumption. The design consists of a 2.2 kW electric motor with 2850 rpm (S3/50% operation type) and a two-cylinder V-unit with oil lubrication and direct drive (motor and unit on one shaft). The compressor is equipped with two pressure gauges, two compressed air outlets with metal quick couplings, pressure switch, with a pressure reducing valve, safety relief valve, check valve, oil seal and two air filters. The mains cable is 1.8 m long and is type H07 RN-F. The pressure vessel has a capacity of 50 l, is equipped with a condensate drain valve, armrests with two rubber feet, a transport handle and all-plastic wheels for easy traversing.
Key features of the GÜDE 405/10/50 compressor
- 2.2 kW electric motor with 2,850 rpm and S3/50 % operation
- Two-cylinder V-unit with oil lubrication and direct drive for long service life
- 50 l pressure vessel with condensate drain valve and supports with rubber feet
- Equipped with two pressure gauges, two outputs with couplers, pressure and pressure reducing valve, check valve, safety valve, oil gauge and air filters
- Easy handling thanks to plastic wheels and handle
Technical specifications:
Voltage: 230V
Volume of the airbox: 52 l
Maximum operating pressure: 10 bar
Wattage: 2 200 W
Maximum flow: 4.17 l/min
Type: oleic
Views: analogue, units of measurement kPa and bar
Protection class: I
Degree of coverage: IP20
Sound power level (LWA): 95 dB(A)
Dimensions: 680 × 360 × 640 mm (l × w × h)
Specifications
Type
Technical parameters
Features
Dimensions and weight
GÜDE CZECH s.r.o., Počernická 120, 360 17 Karlovy Vary, [email protected], +420 353 434 500, www.guede.cz
Specifications can be changed without notice. Images are for illustrative purposes only.
