This page includes the most expensive car Tools QUATROS, or more specifically all products from the category car Tools QUATROS sorted from the most expensive to the cheapest. This way, the most luxurious pieces can stand out. At the moment, the most expensive product is Quatros QS19324 Workshop hydraulic crane 2 t, which costs 266.69 € incl. VAT. Check it out, you may like it. Or you’ll get inspired.
141
Results
Car Mechanic Tools - for plugging solid pipes (steel, copper, etc. ), Prevents fluid loss in fuel, brakes, air conditioning and power steering (including loops, etc. ) during assembly or disassembly of individual elements, Set contents:2 pcs. clamps for ring clamps, 2 pcs. clamps for 8mm pipes, 2 pcs. clamps for 10mm pipes, 2 pcs. clips for 13mm cables
Installation Kit - for repair of oil pan drain bolts M13, M15, M17, M20
Car Mechanic Tools - Perforating set for brake pipe adjustment 4 - 14 mm, Dimensions:4; 4,75; 6; 8; 10; 12; 14mm
Car Mechanic Tools - designed to measure fuel pressure in gasoline injection systems, With the tester you can, among other things, test gasoline engine injection systems and diagnose faults: causes excessive pressure, as well as other irregularities, including: Damaged pressure regulator or fuel line, Clogged fuel return line (or clogged fuel filter), Damaged relief valve or fuel pump, Defects causing vacuum or overpressure, etc., Kit contents: Pressure gauge 0 - 7 bar (0 - 100 PSI), Connector 1/8" - 27 NPT x 1/4" - 18NPT, Connector 1/4" x 1/4" - 18NPT, 1/8" - 24 NPT adapter for serial connection of the tester to 1/4" and 3/8" diameter fuel lines, 1/4" x 2.5" hose, 3/8" x 3.0" hose, Flexible hose 2 pcs, Tightening tapes 2 pcs, Suitcase (colour depends on delivery).
Car Mechanic Tools - Special five-point wrenches for brake calipers, set of 3 sockets (19, 14 and 10 mm)
Tyre mounting lever - Punching and punching tools, set of 4, 20 - 60 cm, QS14249
Car Mechanic Tools - Brake pipe bending jig, for 4.75 mm thickness, larger and smaller bends
Car Mechanic Tools - for cleaning piston grooves of accumulated carbon deposits, Equipped with three knife discs with diameters: 2,5, 2, 3, 4, 4,5, 1/4 1,2, 1,5, 1,8, 2,8, 5, 5,5 1/16, 5/64, 3/32, 1/8, 5 / 32, 3/16, By moving the blade on the flat bar, the blade is adjusted to the appropriate diameter of the piston.
Car Mechanic Tools - 1/2" extendable ratchet, length 30-45 cm, 72 tooth mechanism, quick release, rubberized handle
Tyre mounting lever - to remove the tyres, metal shaft along the entire length, overall length 915 mm, length of working part 710 mm, handle length 205 mm, blade width (flat part) 25 mm
Car Mechanic Tools - allows you to quickly and easily clean the hub or wheel drum of rust, paint, etc. to ensure proper rim-to-hub fit, Outside diameter: 40 mm, Inner diameter: 16,5mm, Maximum speed 3000 rpm. /min., Set contents: Adapter for grinding wheels with attachment for 8mm 6-sided screwdriver, 1/2" x 6-sided 10mm adapter, 5 pcs. coarse grit grinding wheels, 5 pcs. fine grit grinding wheels, 2 pcs. self-adhesive pads with Velcro for attaching grinding wheels
Hand Pump - for topping up fluids, universal filler, for engine oils, gear oils, brake fluid, cleaning products etc., pump with flexible cable ending in a metal spike
Car Mechanic Tools - for pipe and exhaust pipe cutter Quatros QS14761-C, The subject of the offer is a chain for exhaust pipe cutter, Cutting diameter: 20 - 75 mm, Blades made of high quality steel HRC55.
Car Mechanic Tools - Ratchet wrench with ratcheting nut knuckle 13mm
Car Mechanic Tools - universal extender for mounting and dismounting shock absorbers, Universal device for extending the shock absorber seat, the seat of the suspension joint, etc., Extension range from 5 mm to 10.5 mm, Designed for manual work.
Locking Tool - arresting jigs for timing of ford tdci 2.2 litre diesel engines
Car Mechanic Tools - special wrench for shock absorbers, use: for most vag group models with front-wheel drive, vw polo, golf, passat, audi
Puller for axial rod - manual, span 32 - 42 mm, weight 0,8 kg
Car Mechanic Tools - honing head for drill, for cylinders with an inside diameter of 51-177 mm, with honing stones, for manual honing with a drill or in a lathe, adjustable pressure, the head has 3 arms, The length of the grinding stone is 75 mm, the stones are replaceable, maximum speed 2400 rpm /min
Car Mechanic Tools - specialized funnel with a set of accessories for servicing cooling systems, serves as a temporary expansion tank, wide range of adapters allows a tight fit on most vehicles, the funnel cover allows safe venting of the cooling system, diameter 180 mm, height 195 mm, contents of the set: 1 pcs funnel, 1 pcs T-handle plug, 1 pcs cover, 5 pcs filling adapters, 4 pcs adapters for cooling systems, 2 pcs 45° knee, 1 extension piece
Car Mechanic Tools - Cutting agent, splitting of nuts 3-24 mm, For cutting heavily rusted nuts, without damaging the screw thread, 360° swivel, To remove nuts with damaged heads, Even a partially cut nut can be loosened using the arm
Chcete doručit do České republiky? Jdi na
Nářadí na auto
Magyarországra rendelnél? Látogasd meg ezt a termékkategóriát
Autós szerszámok