Meguiar's PRO Hybrid Ceramic Sealant - liquid, professional, hybrid ceramic sealant, 3,79 l

If you want to add protection to your car's bodywork, Meguiar’s PRO Hybrid Ceramic Sealant is the ideal product. Application creates a slippery, water-repellent layer in a matter of seconds. This Meguiar's cleaner features hybrid SiO₂ technology for even greater effectiveness. The product does not turn white even after drying and is suitable for all types of surfaces, including wheels, plastics, rubber, and lights. It provides perfect, long-lasting protection for paintwork, wheels, plastic and rubber trim, polished metals, lights, and other surfaces. Effective protection against UV radiation, acid rain, road and other dirt, oxidation, and other adverse influences that can harm your car's paintwork.

Washing a car with hybrid ceramic wax:
The best way to wash a car protected with hybrid ceramic wax is to use a ceramic car shampoo. In addition to all its benefits, such as a neutral pH, extreme thickness, high foaming, perfect lubrication, and uncompromising cleaning power, a ceramic car shampoo also contains SiO₂ additives, or silicon dioxide—in other words, “ceramic”. These effectively and actively reinforce the protection, improve the hydrophobic properties of all exterior surfaces, and extend its durability. Even on a car that has no protection yet, Hybrid Ceramic Wash & Wax shampoo alone leaves a basic protective layer that can protect the car for a limited time.

When washing with a shampoo containing wax, you may temporarily cover the hybrid ceramic wax on your car with the wax contained in the shampoo. These additives have lower hydrophobicity, so covering the hybrid ceramic wax with them can lead to a temporary reduction in water repellency. Over time, as the wax additives from the car shampoo wear off, the hybrid ceramic wax, which has higher hydrophobicity, is revealed again, and the effect is maximised once more. This phenomenon does not diminish the quality or properties of the hybrid ceramic protection in any way.

If you want to avoid a temporary reduction in hydrophobicity due to covering the hybrid ceramic wax with regular waxes and you are not using a ceramic shampoo, it is recommended to use a car shampoo without wax additives for washing, such as our Gold Class Shampoo & Conditioner or the professional Shampoo Plus. These shampoos do not contain additives that would temporarily cover the hybrid ceramic wax, thus keeping its hydrophobicity at its maximum level permanently.

Application procedure – by hand:
Work on bodywork that is in the shade and cool to the touch. Shake well. Apply a small, coin-sized amount of the product to a foam applicator and work it in completely to moisten the surface. Then, add a cherry stone-sized drop and apply it to the surface. Work in circular motions and let the applicator glide over the surface without any pressure.

Apply a very thin, matt film that is visible against the light. Add more Hybrid Ceramic Sealant, 1–2 cherry stone-sized drops at a time, only when needed—if the applicator is no longer applying a sufficiently thin layer of sealant as it did at the beginning. A thicker layer of hybrid ceramic sealant does not increase the protection. If you use too much sealant, it will be more difficult to wipe off and you will use up the product faster.

Allow the sealant to dry on the surface for at least 2–5 minutes (depending on the ambient conditions you are working in – temperature, air humidity). After drying, wipe the sealant off lightly with a microfibre towel like the X1906 Meguiar’s Supreme Finishing Towel, X2010 Meguiar’s Supreme Shine Microfiber Towel, or E101 Meguiar’s Ultimate Microfiber Towel. The protection will fully cure after 24 hours. During this time, it is recommended not to expose the treated surfaces to water (e.g., washing or rain).
Note: If light streaks or hazing appear immediately after application, do not worry. Allow the product to bond to the paintwork or previous protection layers and enhance the gloss and protection for approximately 15 minutes.

Application procedure – by machine:
Work on bodywork that is in the shade and cool to the touch. Shake well. Use a black foam pad (G3509 for the DA Power System or DFF5 or DFF6 for a DA polisher). Apply 3–4 cherry stone-sized drops to the pad and work them in completely to moisten its surface. Then, add a cherry stone-sized drop and apply the hybrid ceramic sealant to the surface.

Work at a low speed (max. 1200 RPM on a drill, set a DA polisher to 3800 OPM). With no pressure at all, cover the entire bodywork with a thin, matt film of sealant. Add more sealant, 1–2 cherry stone-sized drops at a time, only when needed—if the pad is no longer applying a sufficiently thin layer of sealant as it did at the beginning. A thicker layer of hybrid ceramic sealant does not increase the protection. If you use too much sealant, it will be more difficult to wipe off and you will use up the product faster.

Allow the hybrid ceramic sealant to dry on the surface for at least 2–5 minutes (depending on the ambient conditions you are working in – temperature, air humidity). After drying, wipe the sealant off lightly with a microfibre towel like the X1906 Meguiar’s Supreme Finishing Towel, X2010 Meguiar’s Supreme Shine Microfiber Towel, or E101 Meguiar’s Ultimate Microfiber Towel. The protection will fully cure after 24 hours. During this time, it is recommended not to expose the treated surfaces to water (e.g., washing or rain).