QUATROS QS14138 Cylinder honing jig, range 51-177 mm
Car Mechanic Tools - honing head for drill, for cylinders with an inside diameter of 51-177 mm, with honing stones, for manual honing with a drill or in a lathe, adjustable pressure, the head has 3 arms, The length of the grinding stone is 75 mm, the stones are replaceable, maximum speed 2400 rpm /min
Show full description
32.85 €
Warranty 24 months
Code:
AUPR58427
Producer's Website:
QUATROS QS14138 Cylinder honing jig, range 51-177 mm
32.85 €
In stock > 5 pcs at the supplier's
Buy
QUATROS QS14138 Cylinder honing jig, range 51-177 mm
The tool is used for manual honing of cylinders with a drill or in a lathe. The force of the pressure of the arms on the cylinder wall can be corrected by adjusting the spring preload (pressure) with a hand nut on the shaft.
The product can be used for grinding cylinders with an internal diameter of 51 to 177 mm. Each of the three arms is equipped with an interchangeable honing stone with a length of 75 mm.
Technical parameters Tools for auto mechanics QUATROS
- For diameter cylinders: 51 - 177 mm
- Number of arms: 3
- Adjustable pressure: yes
- Length of the grinding stone: 75 mm
- Maximum speed: 2400 rpm. / min.
P.W. TECHSAM WOCH Sp.J., Aleja Warszawska 131, 20-824 Lublin, [email protected] +48 81 444 63 73
Note:
Specifications can be changed without notice. Images are for illustrative purposes only.
