funguje to z mobilom ?

The slim metal USB 3.2 Gen 1 (USB 3.0) multi-port hub AXAGON HMA-GL3A not only connects up to three USB devices to your laptop or computer at the same time, but also adds a Gigabit network card that connects your computer to a high-speed network. The metal body of the hub is made of aluminium and thus provides perfect mechanical protection for frequent carrying. The fixed 20cm USB cable is ideal for mobile device users. The compact multi-port hub also handles the permanent connection of several external drives. Thanks to the fast USB 3.2 Gen 1 interface, the transfer speed is up to 5Gb/s. The network card extends your computer with a fast and stable network connection, adds a missing RJ-45 network connector or adds another network card. The LAN adapter is compatible with 10/100/1000Mbit/s speeds and also offers a wide range of features, e.g. IPv4/IPv6 checksum to reduce CPU load by checksums, crossover detection and auto-correction, support for various Wake-on-LAN modes, VLAN operation or advanced Power Management features. In modern operating systems from Windows 8.1 onwards, the adapter allows for easy automatic installation without needing an internet connection. The port replicator is an ideal accessory for ultrabooks with a small number of USB-A ports and without a network card.

Support for sleep mode and remote wake-up via Magic Packet, Microsoft Wakeup Frame, Microsoft Wake Packet Detection and Link Change wake-up. ECMA-393 proxZzzy for sleeping hosts standard support for managing the network connection of sleeping hosts using proxy servers. RealWoW! technology support allows remote wake-up over the Internet.


The adapter supports advanced power management to reduce losses at idle or light network traffic. It also supports advanced power saving when the Ethernet cable is disconnected. Support for Advanced Configuration. Power Management Interface (ACPI). Support for Power Management offload (ARP & NS). Support for Microsoft Always On Always Connected (AOAC). Support for Intel Converged Platform Power Management (CPPM). Support for Link Power Management (LPM). Support for Operating System-directed Power Management (OSPM). Support for IEEE 802.3az EEE (Energy Efficient Ethernet).
MS Windows XP / Vista / 7 / 8 / 8.1 / 10 and later, Windows Server 2003 / 2008 / 2012 / 2016 and later (all 32- and 64-bit versions of Windows OS are supported), Mac OS X 10.4.x and higher, Linux with kernel 2.6.x and higher, most versions of Android.
Please note:
You must check with the manufacturer of your Android device to see if an Ethernet connection is supported).

Package contents:
SuperSpeed USB multi-hub with fixed 20cm cable, multi-language manual
Input:
1× USB 3.2 Gen 1 / SuperSpeed USB port, USB-A male connector
Backwards compatible with USB 3.1 Gen 1 / USB 3.0 / USB 2.0 and USB 1.1
USB type A male connector located on a fixed 20cm cable
USB Output:
3× SuperSpeed USB port, USB-A female connectors
Supports transfer speeds of 5,000 / 480 / 12 / 1.5Mb/s (SuperSpeed / High / Full / Low speed)
The total throughput / transfer rate is determined by the USB 3.2 Gen 1 interface used (theoretically 5Gbit/s)
The USB hub can handle the connection of several external drives at the same time
RJ-45 Output:
Gigabit Ethernet interface with RJ-45 connector for UTP or STP cable connection
Supported Ethernet interface transfer rates of 10/100/1000Mb/s
Supported specifications IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T
10/100/1000Mb/s auto-detection
Supports IPv4/IPv6 packet Checksum Offload Engine (COE) to reduce processor load including IPv4 IP/TCP/UDP/ICMP/IGMP & IPv6 TCP/UDP/ICMPv6 checksum checking and generation
Supports TCP Large Send Offload V1 and V2
Supports IEEE 802.1P Layer 2 priority encoding & decoding
Supports IEEE 802.1Q VLAN tagging
Supports IEEE 802.3az EEE (Energy Efficient Ethernet) - reduced power consumption at idle
Supports Jumbo frame.
Supports full-duplex transmissions with IEEE 802.3× flow control and half-duplex transmissions with back-pressure flow control
Supports Auto MDI/MDIX - crossover detection and auto-correction eliminates the need for crossover cables
Supports hardware Cyclic Redundancy Check (CRC) to detect transmission errors
Supports pair swap/polarity/skew correction
Specifications can be changed without notice. Images are for illustrative purposes only.