AXAGON HUE-S2B 4-port USB 3.0 CHARGING hub

Input:
1x USB 3.0

Ports:
4x USB 3.0

Properties:
4 downstream USB 3.0 ports with enough space around the connectors.
Upstream USB 3.0 port with USB 3.0 type-A male connector on a fixed 30cm long cable.
Compatible with USB 3.0, backward compatible with USB 2.0 and USB 1.1.
Supports 1.5 / 12 / 480 / 5,000Mbit/s (low / full / high / super speed) bit rates.
Support USB Battery Charging in 1.2 specifications.
Each hub port can be used to charge up to 2A (with an external USB charger - not included).
Hot Plug support can be connected while running.
Full Plug and Play support.
LED indication of hub connection to power supply.
Current overload detection and protection.

Hub power mode via USB cable (bus power):
The USB bus power is sufficient to connect the USB devices with a low subscription (mouse, keyboard, card reader, flash drive, etc.) or power (printer, scanner, 3.5" external drive) to all four ports.
The USB hub in this power mode also runs up to 2 magnetic 2.5" external drives simultaneously.
Charging mobile devices (including the iPad) is also possible in this power mode, but the charging current is only 0.9A, in some cases over 1A (depending on the computer).

Own hub power mode from USB charger - not included (self-power):
Any mobile device charger with a micro USB connector (recommended 2A charging current) can be used.
The USB hub in this power mode can handle 3 magnetic 2.5" external drives. However, we recommend that you connect up to 2 magnetic external 2.5" drives at the same time for reliable long-range operation.
Quick-charging mobile devices (including iPad) up to 2A in each of the hub ports. The total current supplied by the hub during charging is limited by the output current of the external power adapter.

Independent charging hub mode without charging hub:
When not connected to a computer the USB charger acts as a separate USB hub charging device.
Quick-charging mobile devices (including iPad) up to 2A in each of the hub ports. The total current supplied by the hub during charging is limited by the output current of the external power adapter.

More information:
Hub dimensions 96 x 32 x 2 mm, Hub weight 48g (including cable).

Supported Operating Systems:
MS Windows XP / Vista / 7/8 / 8.1 / 10 and later, Windows Server 2003/2008/2012/2016 and later (supported by all 32- and 64-bit versions of Windows), Mac OS X 10.4.x and higher, Linux with kernel 2.6.x and higher.
Note: Drivers are included with supported operating systems and install completely automatically. No other drivers need to be installed and are not available.

Package contains:
USB 3.0 hub with fixed cable 30cm long. The installation procedure and product parameters are listed on the box.