BTNeon Power supply set for LUXY LED hose 230 V

Accessory Kit - for power supply and control of RGB LED light snake LUXY 230V, 1.5 meter rubber power cable (2×1.0 mm2) with EU IP44 plug and rectifier, one piece of end cap included, 2-pin fork and heat shrink hose, maximum length of one branch is 50 m
  7.89 €
Warranty 24 months Code:  BTNled20
BTNeon Power supply set for LUXY LED hose 230 V 7.89 € In stock > 10 pcs at the supplier's
Buy

BTNeon Power supply set for LUXY LED hose 230 V

The BTNeon power supply set for LUXY 230V LED hoses is used to connect the LED light hose. The set includes a 1.5m rubber power cable (2×1mm²) with an IP44 EU plug and rectifier, a protective sleeve and an end cap to seal the end of the light hose. The connector is used to join two light hoses in a straight line. If the hose does not light up, and the plug is correctly inserted into the wires in the hose sheath, change the power supply polarity by rotating the plug 180°.

BTNeon Power Supply Set for LUXY 230V LED Hoses accessory set

Key features of the BTNeon power supply set for LUXY 230V LED hoses

  • The power source can be used for up to 100m of LUXY LED and older GIVRO hoses
  • Maximum length of a single branch is 50m
  • Cable with an IP44 EU plug and rectifier

Package contents:
Power cable with rectifier, end cap, 2-pin plug, heat-shrink tubing

Voltage:
230V

LED21 s.r.o., 1.máje 905, Bohumín 735 32, Czech Republic, +420 555 500 190, [email protected]

Note:

Specifications can be changed without notice. Images are for illustrative purposes only.

There are no posts in this discussion.
Accessories for BTNeon Power supply set for LUXY LED hose 230 V