Corsair 3200D RS ARGB Smoke
Corsair 3200D RS ARGB Smoke
The Corsair 3200D RS ARGB Smoke PC case serves as the foundation for mounting hardware components and building a Midi Tower desktop computer. This steel chassis, with a total weight of 8.5kg, offers ample internal space for powerful components and efficient cooling for the entire system. The manufacturer has fitted the front panel with three RS120 ARGB fans, which combine quiet operation with colourful backlighting. The left side panel is made of tempered glass, offering a direct view into the interior. The right side panel is made of a solid steel sheet, and the entire construction supports Mini-ITX, MicroATX, and standard ATX motherboards.
Midi Tower
Size
165mm
Max. CPU cooler height
375mm
Maximum graphics card length
3×
Number of pre-installed fans
9×
Total number of fan positions
Key features of the Corsair 3200D RS ARGB Smoke PC case
- Chassis includes three pre-installed RS120 ARGB fans with hub-free daisy-chaining
- The design features an angled bottom fan mount that directs air straight to the card
- A built-in adjustable arm prevents heavy cards from sagging
- Internal space accommodates up to nine 120mm fans
- The cable management system offers 24mm of clearance behind the motherboard
- The front panel allows high airflow thanks to its densely perforated steel sheet
Space for powerful GPUs
The chassis offers plenty of space even for the largest components on the market. Users can fit a GPU up to 375mm long, or up to 400mm if the front fans are removed. The internal space prevents warm air from accumulating around the processor and other key build components. An ATX power supply up to 180mm long has its own dedicated space in the lower section under a shroud, helping to maintain optimal airflow.
Targeted bottom cooling
The case's construction uses a specially designed bottom mount that directs airflow straight to heat sources. This angled element guides cool air directly to the GPU fans, helping to maintain optimal operating temperatures for the graphics card. The entire system effectively dissipates heat even under high load during gaming or demanding work. The power supply shroud also includes two positions for 120mm fans.
Original fans
The manufacturer supplies the chassis with three pre-installed 120mm RS120 ARGB fans. These components use magnetic dome bearings for quiet operation and low friction, which reduces mechanical noise. Users can easily synchronise the backlighting colours and effects with motherboard software such as ASUS Aura Sync, MSI Mystic Light, ASRock Polychrome RGB, or GIGABYTE RGB Fusion.
Simple cable daisy-chaining
Connecting the RS ARGB series fans doesn't require any complicated hubs. The fans can be connected one after another in a single chain, and this connection method significantly reduces the amount of loose cabling in the interior. The entire group is then controlled by a single four-pin PWM connector and one five-volt ARGB connector on the motherboard. This eliminates the need to install additional units and makes cable management easy for users.
Support for modern motherboards
This model fully supports motherboards with rear-facing power connectors, such as the ASUS BTF or MSI Project Zero standards. This system hides almost all power supply cables behind the motherboard tray, leaving the interior completely clean. This gives users an unobstructed view through the tempered glass side panel. There is 24mm of clearance available for routing and securing all cabling.
GPU anti-sag protection
Heavy modern graphics cards often suffer from sagging, which can damage the PCIe slot on the motherboard. The case therefore includes a built-in adjustable arm that holds the card firmly in a horizontal position. This element protects expensive hardware from mechanical damage and maintains a stable position even when transporting the computer. The adjustable mechanism adapts to different sizes and thicknesses of graphics cards.
Midi tower case front panel
The front of the chassis consists of a perforated steel panel that allows a large amount of air into the interior. This design supports a steady supply of cool air from the surrounding environment to the components and contributes to the stable performance of the entire system. Dust filters effectively capture dirt and keep the internal space clean, preventing dust from settling on the coolers.
Options for water cooling
Liquid cooling enthusiasts can enjoy great flexibility when mounting radiators. The case accommodates radiators up to 360mm in size on the top or front of the chassis. This is ideal for building very quiet and powerful computers. Compatible liquid coolers include the H60, H100, H115, H150, NAUTILUS, and TITAN series models. In total, the case can be fitted with 120mm, 140mm, 240mm, 280mm, or 360mm radiators.
Accessible top panel with USB-C
The top edge features a modern set of connectors for quick connection of peripherals. Users will find a high-speed 20Gb/s USB-C port for fast data transfer. There is also a classic USB 2.0 Type-A port, a power button, and a combined audio jack for headphones and a microphone. For connection to the motherboard, there are USB-3.2 Gen2×2 Type-E, USB 2.0 9-Pin, F_PANEL, and HD Audio connectors.
Motherboard formats
- mITX (Mini ITX)
- mATX (Micro ATX)
- ATX
Fans
- Top fan size: 2× 140mm, 3× 120mm
- Front fan size: 2× 140mm, 3× 120mm
- Bottom fan size: 2× 120mm
- Rear fan size: 1× 120mm
- Number of installed fans: 3× 120mm
- Supported top radiator size: 120mm, 140mm, 240mm, 280mm, 360mm
- Supported front radiator size: 120mm, 140mm, 240mm, 280mm, 360mm
Ports
- 1× USB-C 3.2 Gen 2×2
- 1× USB-A 2.0
- 1× combined 3.5mm audio connector
Specifications
Usage and size
Colour
Internal structure
External structure
PSU
Cooling system
Backlight
Material
Specifications can be changed without notice. Images are for illustrative purposes only.
