
The DeepCool PF350D PC power supply provides stable power for basic and office computer builds that do not require high graphics performance. With a total output of 350W and an ATX12V V2.4 format, it is compatible with standard cases and motherboards. It meets the 80 PLUS certification, which in practice means achieving at least 85% efficiency under typical load. Higher efficiency brings lower running costs due to reduced electricity consumption. At the same time, waste heat production is reduced, leading to lower cooling demands and quieter operation for the entire system.
When choosing a suitable PC power supply, the key parameter besides the format is its power output. This indicates the maximum number of Watts the power supply can continuously deliver to the computer's components. It is a good idea to use a web calculator to determine the optimal power output based on your chosen components.
A 120mm fan, designed for quiet operation, dissipates heat from the internal components. The hydraulic bearing used reduces friction and vibration, resulting in a low noise level even during prolonged use. The fan speed automatically adjusts to the power supply's current load, maintaining an optimal balance between cooling performance and acoustics.
The power supply uses a set of fixed, non-modular cables in a uniform black finish. Their flat profile makes them much easier to route and manage inside the computer case. The cables can be more easily bent and routed behind the motherboard, freeing up space in the main part of the case. This not only contributes to a cleaner-looking build but also promotes more efficient airflow for cooling other components.
For stable and safe operation, the power supply includes a set of key protection circuits. The implemented over-power, over-voltage, and short-circuit protections (OPP, OVP, SCP) actively monitor electrical values and immediately disconnect the power supply if an anomaly is detected. This protects connected components, such as the processor or motherboard, from irreversible damage. Long-term reliability is confirmed by a mean time between failures (MTBF) of 100000 hours.
The 80 PLUS certification confirms high energy efficiency. The topology used, with active Power Factor Correction (PFC), further improves stability and reduces interference in the electrical grid. This circuit ensures that the power supply draws energy from the mains more efficiently. The DeepCool PF350D is fully compliant with the ATX12V V2.4 standard, confirming its compatibility with modern hardware configurations and their power requirements.
The 80 Plus certification was created to objectively assess the efficiency of PC power supplies. This gives users a simple and clear way to compare different models. In the European market (where a voltage of 230V is used), there are six levels of 80 Plus certification with set requirements for PC power supplies. Higher energy efficiency primarily means lower energy consumption.
| PC power supply load | Efficiency at 20% load | Efficiency at 50% load | Efficiency at 100% load |
|---|---|---|---|
| 80 PLUS | 82% | 85% | 82% |
| 80 PLUS Bronze | 85% | 88% | 85% |
| 80 PLUS Silver | 87% | 90% | 87% |
| 80 PLUS Gold | 90% | 92% | 89% |
| 80 PLUS Platinum | 92% | 94% | 90% |
| 80 PLUS Titanium | 94% | 96% | 94% |
Specifications can be changed without notice. Images are for illustrative purposes only.