D-c-fix off-white matt, width 45 cm

D-c-fix self-adhesive film revives the look of your furniture. It's also suitable for window panes, storage boxes, files, jars, tiles, doors, door frames and kitchen units. It is safe for health, environmentally friendly, lightfast and can even be used in a child's room. It contains no heavy metals and the adhesive used is solvent-free. It is also abrasion-resistant. You can apply it to any smooth, dry, and clean surface, as well as absorbent surfaces. D-c-fix film has an integrated self-adhesive layer, which makes it easy to apply. You can cut it to size as needed using scissors or a utility knife.

How to use:
Clean and degrease the surface. Clean window panes with an alcohol-based cleaner and let them dry. Clean furniture and laminate with a damp cloth. First, carefully measure everything dry, paying close attention to the direction of the pattern for films with a wood-imitation design. You can cut the film with scissors, but for more precision, use a utility knife with a metal straight edge. When applying to larger areas, it's a good idea to moisten the surface with a water sprayer. This does not apply to mirror, chalkboard, metallic-imitation, or velour self-adhesive films. Water is ideal for window films and wood-imitation films. Peel off about 10cm of the backing paper and place the adhesive side onto the surface. Slowly and gradually pull off the backing paper while continuously smoothing the film with a squeegee or sponge. Push out any bubbles to the sides. If the film wrinkles or becomes crooked, carefully peel it back, straighten it by stretching, and reapply. The film has a so-called "adhesion timer", meaning you can only make corrections by peeling it off within a few minutes to tens of minutes. After several hours, the adhesive bonds firmly, and corrections are no longer possible. If you are covering larger areas that require joining sections, an overlap of 5–10mm is recommended. Let the film overhang at the edges and trim it only at the end. When covering edges or bends, you can use a hot air gun, which will soften the film and allow it to bend and stretch. You need to work carefully to avoid irreversible damage to the film. You can also use a squeegee for smoothing.