DEN BRAVEN QUARTZ PROFI P801 wall and floor tile adhesive - grey
DEN BRAVEN QUARTZ PROFI P801 wall and floor tile adhesive - grey
Key Features of QUATZ PROFI P801 Tile Adhesive, Grey
- Cementitious tile adhesive
- Water and frost resistant
- For indoor and outdoor use
- With reduced slip
- Suitable for bonding to plaster, concrete, aerated concrete or unplastered masonry
- Complies with European standard ČSN EN 12004:2007+A1:2012 for type C1T
Consumption:
2.5kg/m² at 3mm thickness for wall tiles
4.0kg/m² at 6mm thickness for wall tiles
6.0kg/m² at 6mm thickness for underfloor heating
3.5kg/m² for bonding insulation at 3mm thickness
4.0kg/m² for screeding the reinforcement mesh
Limitations:
Not suitable for bonding at temperatures below 5°C and in direct sunlight. Quartz PROFI P801 adhesive is not suitable for bonding to plastic and metal substrates or wood-based substrates. It can only be used for heated floors with a gradual temperature increase. Not suitable for lime plaster, old tiles, wood and paint coatings. Cannot be used for tiles made of highly non-absorbent materials.
Specifications
Type
Features
Colour
Packaging
Den Braven, Úvalno 353, 793 91 Úvalno, [email protected], https://denbraven.cz/
Specifications can be changed without notice. Images are for illustrative purposes only.
