HEISSNER Swimming pond CFP 2
HEISSNER Swimming pond CFP 2
The swimming pond has never been more accessible. Thanks to the complete set of components, the swimming pond becomes a self-buildable dream, without costly concreting, with fast construction.
Key features of the HEISSNER CFP 2 swimming pond
- You can use our pond design to build a pond, which is adapted for the largest possible bathing zone, or you can customize it according to the space available in your garden and your requirements, you just need to stay within the maximum size, which is determined by the size of the pond liner, namely 3.36 × 2.38 and up to a depth of 1 m
- Pond lighting can be used in or out of the water, including interchangeable coloured glass slides to change the colour of the lighting
- Detailed procedure including design and drawing of the pond can be found in the detailed instructions
The set includes
- Pond liner
- Protective pond geotextile under the foil
- Pond flow filtration including filter media
- Houses for colonization with pond bacteria
- Filter sponges for coarse dirt
- Regulated pump with low consumption
- UV anti-algae lamp
- Hose connections for connecting the pump to the filtration and pond hose
- A year's supply of water conditioner, containing a water conditioner that regulates the hardness and PH of the water so that the pond bacteria that remove nutrients from the water work properly The second ingredient is pond bacteria (10 sachets)
- Instructions for building a pond
Instructions for building a pond
What you need: wheel, or. minibagr, measuring bar, A spade, a shovel, a spirit level, Meter, garden hose, Sand, large and small pebbles, decorative stones, pond plants and substrate. Mark the outline of the pond on your property with a garden hose (sand, spray). Dig up the soil along the marked pond and place it next to the pond. Start digging First dig the mud zone (0-15 cm) from the edges to the centre, then the coastal shallow zone (15-50 cm) and finally the deep zone (50 cm and above). The slope of the individual zones should not exceed 30°, otherwise the soil and planters may slide down. The edges on all sides must be the same, use a measuring tape and a spirit level to do this. Use the soil from the excavation for levelling. Apply a 10 cm layer of sand on all horizontal surfaces. Level with a spirit level and batten and bite off. Then line this pit with geotextile. Place the foil in the centre of the pit and start laying the foil from there. Finally, pull the foil over the edge to create a capillary curtain (a groove filled with pebbles, decorative gravel will prevent water from rising from the foil lintels). Once the foil has been flattened, you can plant the plants in the planter baskets and settle the equipment. Fill the pond with tap or well water. After 24 hours, cut off the overhanging foil. Fill the groove with stones to fix the foil and prevent water from rising (capillary effect).
Specifications
Features
Dimensions and weight
CF GROUP CZ & SK s.r.o., Jesenická 372, 252 44 Dolní Jirčany - Psáry, [email protected], +420 777 705 656
Specifications can be changed without notice. Images are for illustrative purposes only.
