MARIMEX swimming pool chemistry is used as a disinfectant for all-season maintenance and operation of open or indoor swimming pools, preventing the development of algae and viruses. The tablet slowly dissolves in the water and gradually releases chlorine, thus disinfecting and oxidizing organic pollution in the pool water. The tablets can be used both in the skimmer and with the dispenser in the circulation line or with the float with filtration on.
Important Notice:
Types of hazard:
H272 May intensify fire; oxidant
H302 Harmful if swallowed
H319 Causes severe eye irritation
335 May cause respiratory irritation
H410 Highly toxic to aquatic life, with long-lasting effects
EUH031 Releases toxic gas on contact with acidsEUH206
Look out! Do not use together with other products. May release dangerous gases (chlorine). Use biocides safely. Always read the package leaflet and the accompanying product information before use.
Guidelines for safe handling:
P101 If medical attention is required, keep the product packaging or label handy.
P102 Keep out of the reach of children.
P210 Protect from heat, hot surfaces, sparks, open flames and other sources of ignition. No smoking.
P220 Keep away from clothing and other combustible materials.
P261 Avoid inhalation of dust.
P273 Avoid release to the environment.
P280 Wear protective gloves/goggles.
P405 Store locked.
Instructions for use and dosage:
Before using chlorine tablets for the first time, always carry out a preventive water treatment with Aquamar Start fast dissolving chlorine product, Aquamar Chlor Stabil chlorine stabilizer and adjust the pH value of the pool water to 6.8-7.2. Depending on the water temperature, 1-2 tablets per 30 m³ (30,000l) of water are added every 5-8 days, 1 tablet up to a water temperature of 25 °C and 2 tablets up to a water temperature above 25 °C.
In order to achieve crystal clear and permanently hygienic water, the pH value should be kept in the range of 6.8-7.2 and the free chlorine content should be kept in the range of 0.3-0.6mg/l. If the free chlorine content falls below 0.3mg/l, chlorine must be added, if higher than 0.6mg/l, do not use the pool, limit the chlorine supply and wait for the value to fall within the specified range.
Important:
Measure the pH value and free chlorine concentration regularly, at least twice a week, using test kits. If the pH value is outside the specified range, use products to lower or raise the pH.
Float application method:
Place the required amount of tablets into the dosing float. Allow the float to move freely on the surface of the pool where there is more water movement.
Dispenser built into the circulation pipe:
Put the required amount of tablets into the dispenser. Adjust the control valves of the dispenser so that the free chlorine content is approximately maintained. NEVER THROW TABLETS INTO THE POOL.
Storage:
Store the product in its original sealed container in a cool, dry place at temperatures up to 50 °C in a well-ventilated area, away from food, drink and feed, and away from flammable, acidic and oxidizing substances or solvents. Keep out of the sun.
Marimex CZ s.r.o., Libušská 221/264a, Libuš, 142 00 Praha 4, [email protected]
Specifications can be changed without notice. Images are for illustrative purposes only.
