PATTEX Fix Extreme Total for absorbent and non-absorbent materials 440 g

PATTEX Fix Extreme Total is the ideal helper for assembly work both indoors and outdoors. It reliably bonds non-absorbent and absorbent materials, so you can use it for bonding, filling and sealing. The adhesive is suitable for use on a wide range of materials, such as wood, metal, concrete, plasterboard, plywood, MDF, polystyrene, rigid PVC, plastics, bricks, stone, glass, ceramics, painted surfaces and mirrors. It offers a high initial tack of up to 3.5kg/cm² and holds instantly. It is resistant to UV radiation and weathering. 

Directions for use:
The surface to be bonded must be clean, dry and completely free of grease. When using a cartridge, cut off the tip above the thread, screw on the plastic nozzle and cut it at an angle. Then insert the cartridge into the application gun. Apply the adhesive to one of the surfaces:
1. In spots to smooth out unevenness
2. In a wavy line for higher initial tack
3. On wide surfaces or in straight lines for smaller areas
4. For outdoor use, apply vertical strands.
Remove any adhesive residue immediately with a damp cloth. Once cured, the material can only be removed mechanically.

Weight:
440g

Please note:
Not suitable for bonding PE, PP, PTFE, acrylic glass, copper, brass and soft PVC.