PPG Primalex thin-coat glaze 3in1 cedar libanon, 5 l
- Help and manuals
- Ingredient
- Specifications
- Photos & Videos 2
- Alternatives 8
- Accessories and suggested products
PPG Primalex thin-coat glaze 3in1 cedar libanon, 5 l
Primalex 3-in-1 wood stain is designed for protective and decorative coats on exterior wooden surfaces, such as fences, pergolas, cladding, windows and doors. It combines impregnation, a base coat and a final wood stain, eliminating the need for other products. It soaks deep into the wood's structure, giving it protection against UV radiation and moisture. Its thin-layer formula enhances the natural grain of the wood. Once dry, it leaves a matte surface that does not crack or peel. You can easily apply the wood stain with a brush.
Key features of the Primalex 3-in-1 thin-layer wood stain in cedar of Lebanon
- Designed for exterior use
- Suitable for fences, pergolas, cladding, windows and doors
- Combines impregnation, a base coat and a wood stain
- Protects wood from UV radiation, mould, rot and pests
- Creates a matte finish in a cedar of Lebanon shade when dry
- Enhances the natural wood grain, does not crack or peel
- Two coats recommended
- Drying time before the next coat is approximately 12 hours
- Theoretical coverage of 15m²/L
- Package volume of 5L
Application and coverage
The wood stain needs to be applied to a clean and dry surface, free of dirt and old coats. Two coats are recommended for an optimal result. One litre treats approximately 15m² of surface area in a single layer, but the final consumption also depends on the absorbency and type of wood. The entire 5-litre package is therefore enough for roughly 75m² of coating. A major advantage is that subsequent surface treatment is possible without the need for prior sanding.
Specifications
Type
Colour
Technical parameters
Features
Packaging
PPG Deco Czech a.s., Břasy 223, 338 24 Břasy, 800 101 000, [email protected]
Specifications can be changed without notice. Images are for illustrative purposes only.
