Primalex Sealant for synthetic paints 0,5 l

Primalex Sealant for synthetic paints is designed for levelling unevenness of exterior and interior wooden and metal surfaces. The sealant is water resistant, fast drying, hard, very easy to apply and sandable. Ideal for filling unevenness that may arise when repainting by removing the original paint, e.g. for window frames, doors, if applicable. wooden and metal structural elements or to level the surfaces of larger areas before applying topcoats, e.g. for wooden constructions, furniture boards, etc. sheet metal and other materials.

Storage:
Store at 0 °C to 35 °C. When stored in the prescribed manner in closed packaging, the product retains its useful properties at least until the date indicated on the packaging.

Colour:
White

Drying time:
Resharpening 2 hours. Top coat application 4 hours. The time is defined for standard conditions, i.e. T = 23 °C; relative humidity 50%. A decrease in temperature, humidity or wood can increase the drying time.

Safety Alert:
When you inhale: move the affected person to fresh air, provide him with rest, prevent hypothermia. When ingested: rinse your mouth and seek medical attention. Do not induce vomiting. When the skin is affected: wash the skin with plenty of water and soap. In case of eye contact: rinse for 10 to 15 minutes with clean water. The paint is not intended for coatings that come into direct contact with food, feed and drinking water and for coating children's furniture and toys. H226 - Flammable liquids and vapours. P102 - Keep out of reach of children. P101 - If medical attention is required, keep the product packaging or label handy. P280 - Wear protective gloves/protective clothing/goggles/face shield. P210 - Protect from heat, hot surfaces, sparks, open flames and other sources of ignition. No smoking. P303 + P361 + P353 - IF IN CONTACT WITH SKIN (or hair): Take off immediately all contaminated clothing. Rinse the skin with water/shower. P403 - Store in a well-ventilated place. P235 - Keep refrigerated. P501 - Dispose of contents and packaging in accordance with all local, regional, national and international regulations. Content of hazardous substances: Naphtha (petroleum), hydrotreated heavy. Contains butanonoxim. May produce an allergic reaction. VOC IIA/d, the maximum threshold for VOC content is 300 g/l (2010); this product contains a maximum of 300 g/l VOC in the ready-to-use state. Disposal of packaging and waste: Product residue: N 08 01 11 Waste paints and varnishes containing organic solvents or other hazardous substances; Packaging clean: O 15 01 06 Mixed packaging. It is forbidden to dispose of it with domestic waste. Dispose of leftover product or contaminated packaging at a location designated by the municipality for disposal of hazardous waste or give it to a person authorised to handle hazardous waste. If it is necessary to remove old (original) coatings, follow the recommendations - see Substrate preparation. Use respiratory protective equipment, goggles and ensure good ventilation of the room, and observe basic hygiene - do not eat, drink or smoke. Dispose of the remaining product under the waste code: N 17 09 03 - Other construction and demolition waste (including mixed construction and demolition waste) containing dangerous substances.