Remmers Cross Cut Protection Coating (extra) 0,75 l Colourless
Remmers Cross Cut Protection Coating (extra) 0,75 l Colourless
Key features of the Remmers Cross-Cut Wood Protector (extra), clear, 0.75L
- Special protective gel coating for cross-cuts to prevent moisture penetration
- Elastic, film-forming and water-repellent
- Slows water vapour diffusion
- Effectively reduces swelling of wood caused by moisture
- Can be painted over with commonly available coating systems
- For interior and exterior wood, both softwood and hardwood
- Ideal for dimensionally stable wooden components such as windows and doors, and for semi-stable components like shutters, cladding and garden houses
- Also suitable for non-dimensionally stable wooden components, e.g. fences, timber framing, carports and wooden panelling
- Provides moisture protection for cut and end-grain surfaces
- Slight odour during application, odourless once dry
- Ready to apply – no thinning required
- Apply with a flat brush with plastic bristles
Substrate requirements:
Dimensionally stable wooden components – wood moisture 11–15%
Semi-dimensionally stable and non-dimensionally stable wooden components – max. wood moisture 18%
The substrate must be professionally prepared, clean, dry, and free from dust, grease and any loose particles
Preparation:
Impregnate non-resistant wood with a wood preservative (use biocidal products safely. Always read the label and product information before use). For non-film-forming products (thin-layer stains and oils), application follows after these products have been fully applied, as they would otherwise not be absorbed. For film-forming products (medium-layer stains and opaque paints), application is carried out between the first and second coats of these products. After applying the primer, carry out a light intermediate sanding.
Application:
Mix the material well. Apply with a brush. In exceptional cases, a second application may be necessary. After drying, apply an intermediate and final coat with suitable products. Close opened packages tightly and use them as soon as possible. Check the coating's compatibility, adhesion to the substrate and shade with a test coat. Before coating technically modified wood and wood-based materials, a test coat and a suitability test for the desired area of use must be carried out. Good ventilation must be ensured. Clean tools immediately with water and detergent. Dispose of cleaning residues in accordance with regulations.
Drying:
Low temperatures, insufficient air exchange and high air humidity will significantly prolong the drying time.
Binder:
Acrylate
Density (20°C):
approx. 1.04g/cm³
Consumption:
approx. 100ml/m² depending on the type and absorbency of the wood
Storage:
Store in sealed original packaging in a cool, dry place protected from frost. Shelf life of at least 24 months. Use opened packages as quickly as possible.
Please note:
Ensure compliance with the current standards and guidelines for the surface treatment of exterior wooden components. Larger product residues must be disposed of in the original packaging in accordance with applicable regulations. Only completely empty packaging should be sent for recycling. Must not be disposed of with household waste. Do not empty into drains. Do not pour down the sink.
Remmers s.r.o., Technická 2247, 251 01 Říčany, Česká republika, IČO: 25643011, +420 323 604 877, [email protected]
Specifications can be changed without notice. Images are for illustrative purposes only.
