Remmers Holzschutz-Grund impregnation 2,5 l Farblos / Colourless
Remmers Holzschutz-Grund impregnation 2,5 l Farblos / Colourless
Key features of the Remmers Holzschutz-Grund Farblos (colourless) impregnator, 2.5L
- Solvent-based wood impregnator with preventive action against blue stain, rot and wood-destroying insects
- Preventive protection against wood-staining fungi (blue stain), wood-destroying fungi (rot) and wood-destroying insects
- Resistant to swelling, regulates moisture
- Good adhesion for subsequent coats
- Designed for use on exterior wood and wood not in contact with the ground according to DIN EN 335-1, GK 2 and 3
- Ideal for dimensionally stable wooden components (as a base coat only) – e.g. windows and doors
- Also suitable for semi-dimensionally stable wooden components (as a base coat only) – e.g. shutters, profile boards, garden houses
- Can also be used for non-dimensionally stable wooden components (as a base coat only) – e.g. fences, shelters, wood cladding
- Use as a pre-treatment under staining, top and oil coats
- Smells of solvent when applied, odourless once dry
- Apply with a flat, natural-bristle brush, not a foam roller
Substrate requirements:
Dimensionally stable wooden components – wood moisture 11–15%
Semi-dimensionally and non-dimensionally stable wooden components – wood moisture max. 18%
The substrate must be clean, dust-free and dry
Preparation:
Thoroughly remove dirt, grease and loose old coats. When working, protect surrounding building components and materials from contact with the product. Follow the generally applicable rules for coating wood and wood materials in exterior spaces.
Application:
Mix the material well. Apply in the direction of the grain. Private users – apply with a brush/roller in the direction of the grain. Qualified specialised companies – brushing/rolling, automatic and manual dipping, spray tunnel methour With hardwoods such as oak, red cedar, afzelia, sequoia, etc., water-soluble substances from the wood may be washed out by precipitation – this can lead to discolouration of light-coloured masonry or plaster. Use the product only on raw wood. Keep children and pets away from treated surfaces until completely dry. Clean tools immediately after application with thinner or brush cleaner. Dispose of washing residues in accordance with regulations.
Drying:
Low temperatures, insufficient air exchange and high air humidity significantly prolong drying time.
Binder:
Alkyd resin
Density (20°C):
approx. 0.81g/cm³
Consumption:
Softwood – 160ml/m² or 130g/m²
Hardwood – 225ml/m² or 180g/m²
Brushing/rolling in 2–3 coats. Automatic and manual dipping, spraying in a spray tunnel in 1–2 coats.
Storage:
Store in well-sealed original containers and out of the reach of children, in a dry, cool place protected from direct sunlight and frost in well-ventilated rooms. Smoking is prohibited in storage areas. Store the biocidal product in a dry and cool place at a temperature not exceeding 40°C.
Warning:
Larger product residues must be disposed of in the original packaging in accordance with the applicable regulations. Only recycle containers that are completely empty. Must not be disposed of with municipal waste. Do not empty into drains. Do not pour down the sink. Waste code 03 02 02 (chlorinated organic wood preservatives).
Remmers s.r.o., Technická 2247, 251 01 Říčany, Česká republika, IČO: 25643011, +420 323 604 877, [email protected]
Specifications can be changed without notice. Images are for illustrative purposes only.
