iPhone SE 32GB - Space Grey

The biometric technology of fingerprinting has undergone significant developments in recent years. Old scanning methods are gradually being replaced by new and more efficient methods. How do these latest fingerprint scanning technologies work?

IPS, or In-Plane Switching, often also known as Super TFT, is a type of LCD display technology. It offers an excellent quality-price ratio, natural colours, low power consumption, and wide viewing angles up to almost 180 degrees.

Electronic stabilization is a tool that prevents video shake. It works by trimming the edges of the actual image that the phone or camera is recording so that the object being recorded is still in the same place even though the camera is moving.

NFC (Near Field Communication) is a wireless communication used to establish a connection between portable devices, over a very short distance, only up to 4cm. Previously, NFC was used to transfer photos and videos, but you'll often hear about it in connection with contactless payments.

Bluetooth is the communication tool used by a huge amount of electronics. Learn how the frequency signal is generated and how it's used. In a simple overview of the different versions, we will show how Bluetooth has evolved and been refined. You can also learn something about the specifications and security of this communication standard.

A device that receives a GPS signal to determine and record a location. GPS modules can be found in car and motorcycle navigation systems, cyclocomputers, sporttesters and GPS locators.

A-GPS is a sophisticated GPS protocol that helps you quickly locate your mobile device.

LTE (Long Term Evolution) marks the next generation of mobile data networks. This is an intermediate step between 3G and 4G. Although manufacturers and operators sometimes mistakenly refer to it as 4G, it is not a full 4G network. That's for LTE Advanced. The maximum theoretical data transfer rate is up to 175Mbps for download and up to 57.6Mbps for sending data in one frequency band. 

NanoSIM is the smallest, most advanced type of SIM card.

The LTE network also carries VoWiFi (Voice Over Wi-Fi). This technology is often mistaken for VoIP (Voice Over IP), which enables calls over the Internet. VoWiFi connects to the radio part of the network via your home Wi-Fi coverage, so it looks like you are simply calling via a standard GSM network. It is mainly used in areas with poor coverage. Just like VoIP, this function must be supported both by your operator and your phone in order to work.

VoLTE (Voice over LTE) is an LTE technology that enables voice service over LTE. The standard must be supported by both your phone operator and the phone itself in order to work. Its advantages are high call quality and faster network connection.

The Lightning connector is used with iPhone models and various Apple products. It's a tiny (8-pin) duplex port that carries both digital signal and power. The proprietary Apple cable has a Lightning connector on one end (the one plugged into the phone) and a standard USB connector on the other, making it compatible with a PC or car charger. The iPhone 7 also uses it as a headphone jack adapter.

A digital compass (magnetic sensor) detects the earth's magnetic field to determine the cardinal points. This enables the phone to correctly rotate the map to fit your orientation.

Accelerometers and G-Sensors are motion sensors that determine the tilt in space. The phone uses it to know which way it is being held, e.g. portrait, landscape or upside down.

The motion of a gyroscope rotates in space on all three axes. In this case, it determines the direction in which you are moving your phone.

An ambient light sensor that monitors the ambient light levels and dynamically adjusts the display backlight intensity. A practical and handy feature, it is part of most modern phones. It turns the display brightness to the maximum in bright sunlight and dims the backlight in the dark. This makes the phone’s display perfectly readable in all lighting conditions without straining your eyes.

The vast majority of modern mobile phones are equipped with a proximity sensor. Its task is to evaluate the distance of an object from the sensor. Once the object gets close, the telephone activates a particular function. One of the most common is the function to turn off the screen and the touch layer when the user dials a phone number and places the phone close to his ear.