METALAC Centaurus MB PKD 120 KGI, 120L, Combination, Right-Sided, Stainless Steel
- Help and manuals
- Ingredient
- Specifications
- Photos & Videos 5
- Alternatives 8
- Accessories and suggested products
METALAC Centaurus MB PKD 120 KGI, 120L, Combination, Right-Sided, Stainless Steel
The METALAC Centaurus MB PKD 120 KGI is a 120 litre combination water heater, designed for vertical mounting and right-hand connection. Thanks to the high quality stainless steel vessel, polyurethane insulation and ceramic heating element with so-called. "dry heating" offers reliable operation and long service life. It is equipped with an operating and safety thermostat, a safety valve and a magnesium anode for increased corrosion protection. The electric heating capacity is 2.1 kW, while the heat exchanger has a capacity of 7 kW. The boiler is supplied with a universal bracket suitable for mounting holes from 130 mm to 360 mm. It is recommended that the heater be installed by a professional company.
Key features of the boiler METALAC Centaurus MB PKD 120 KGI, 120L, Combined, Right-Sided, Stainless Steel
- The container is protected against corrosion by a magnesium anode, which extends its lifetime
- Package includes safety valve (8 bar) and wall mounting bracket
- A current water temperature indicator is located on the front for easy checking
- Suitable for supplying multiple points of use - ideal e.g. for kitchen and bathroom
- Design allows safe use even in hard or chemically aggressive water
- Designed for domestic hot water (DHW) heating in buildings where low electricity tariff (night current) can be used
Recommendations before wall mounting
Before installation, it is necessary to check the load-bearing capacity of the wall and select the appropriate anchoring material according to the type of masonry, or reinforce the wall. Mount the water heater vertically only so that the bottom edge of the heater is at least 600 mm above the floor. It is recommended to entrust the wall mounting and anchoring to a professional company.
Technical Specifications
Volume: 120 l
Vessel: stainless steel
Diameter: 454 mm
Dimensions: 1105 × 480 mm (h × d)
Weight without water: 31,6 kg
Assembly: right-hand connection, vertical wall mounting
Holder/Hooking: universal / hole range from 130 mm to 360 mm
Voltage: 230V
Wattage: 2100 W
Heating element: stainless steel ceramic
Max. the operating pressure of the vessel: 0,6 MPa
Safety valve: 0,8 MPa
Electric heating time to 75°C: 275 min
Amount of water with a temperature of 40°C: 145 l
Flange (flange): round (diameter 72 mm)
Isolation: polyurethane from 17 mm to 40 mm
Connection pipe: 1/2"
Connection pipe exchanger: 1/2"
Exchanger area: 0,30 m²
Exchanger performance: 7 kW
Length of Mg anode ø 22mm: 120mm
Energy class: C
Specifications
Location
Heating
Heating housing type
Features
Energy specifications
Volume
Volume for gen. categories
Power consumption
Dimensions
MAREX TRADE s.r.o., K Šeberáku 180/1, 14800 Praha- 4 Kunratice, [email protected], +420 607 032 153
Specifications can be changed without notice. Images are for illustrative purposes only.
