Olife Energy DoubleBox AC 22 kW - Solar - 2 twisted cables Type 2, 4 m
Olife Energy DoubleBox AC 22 kW - Solar - 2 twisted cables Type 2, 4 m
The OlifeEnergy DoubleBox is a durable, all-metal charging station for charging two electric vehicles with alternating current (AC) at a power of up to 44kW (22kW each), which lets you charge your electric vehicle from your photovoltaic power station (PV). It is designed for both indoor and outdoor use, with the option of mounting it on a wall or on a ground-mounted post. The DoubleBox is equipped with a special coiled Type 2 cable. Charging can start automatically as soon as the vehicle is connected, after identification with an RFID card, or via a mobile phone. The smartphone app is also used for complete configuration. The station's power can be set in the range of 0–44kW, and the set power is shared between the connected vehicles. The station can be connected to a ripple control receiver, integrated into a smart home, linked with a battery storage system, or integrated with other control systems. Using the external OlifeEnergy SmartMeter unit, you can dynamically manage the station's power to prevent the circuit breaker from tripping during high consumption, charge from solar power surpluses, or use off-peak tariffs.
Key features of the OlifeEnergy DoubleBox AC 22kW - Solar - 2 coiled Type 2 cables, 4m
- Ideal DoubleBox for home and business use
- RFID authorisation
- Configuration via mobile app (local Bluetooth)
- Charges from PV surpluses
- Communicates with photovoltaic inverters
- A 'New Green Savings' grant can be obtained for the purchase of an Olife Energy charging station
For charging two electric vehicles at the same time
The Olife Energy DoubleBox AC 22kW - Solar is designed for charging all types of electric vehicles on the EU market with alternating current (AC). It can charge two electric vehicles at the same time, each with a power input of up to 22kW. The input power cable must be preceded by a Type A residual current device with a minimum nominal rated current of 40A.
Smart charging from photovoltaic surpluses
The solar module supports three main charging modes. In the mode for charging an electric vehicle from PV surpluses, the DoubleBox SOLAR communicates with selected PV inverters (GoodWe (ET series), SOLAX, Dražice, Huawei (SUN2000)) for domestic photovoltaic power stations (PV) without the need to purchase an OlifeEnergy SmartMeter to protect the main circuit breaker. The solar module communicates with the photovoltaic inverter via Wi-Fi or the Ethernet ModBus TCP protocol over the local network (LAN). It also enables remote management and configuration of the station over the local network. Cooperation with the inverter lets the station manage the electric vehicle's charging to achieve the highest possible charging speed with maximum efficiency of the solar energy produced, charging the car from PV surpluses. In this mode, the charging intensity of the electric vehicle continuously adapts to the current energy production from the photovoltaic power station and the current household consumption. The main goal is to maximise the use of the solar energy produced for charging and to minimise or completely prevent energy overflow back into the distribution grid.
Smart start charging with grid support
Nabíjení se spustí pouze tehdy, když je k dispozici přebytek energie odpovídající minimálnímu nabíjecímu proudu 6 A (dáno vlastnostmi vozidla). V tomto režimu lze nastavit také Síťového asistenta - dokup chybějících ampérů ze sítě. Např. nastavím dokup 3 A a pak se nabíjení spustí už při přetocích 3 A, jelikož součet dosáhne potřebných 6 A. Eliminuje se tak zastavení nabíjení, pokud například přijde mrak a výroba na FVE poklesne. Síťový asistent vždy dokupuje jen maximální nastavenou hodnotu ampérů. Pokud je přetok vyšší, dokup neprobíhá. Například mám nastaven dokup 3 A, ale přetok je 5 A, dokupuje se jen 1 A. Pokud je přetok 7 A, nedokupuje se nic.
Technical specification:
Output: 2× Type 2
Output type: coiled cables
Output power: 0–44kW (maximum power is limited by the upstream circuit breaker)
Max. supply cross-section: 25mm²
Overcurrent protection: 2× three-pole circuit breaker 32A
Residual protection: 2× four-pole Type A RCD + residual DC current detection according to IEC 62955
Data connection BASE: RS-485, Bluetooth
Data connection PLUS: Ethernet, Wi-Fi
Data connection CLOUD: Ethernet, Wi-Fi, GSM
Weight: 26kg
Dimensions (without cables, including socket cover and cable holder): 385 × 550 × 140mm (w × h × d)
Specifications
Features
Connector type
Operating temperature
Proud
Degree of protection
Wallbox
Connectivity
Dimensions and weight
Olife Energy, a.s., Lazarská 11/6, 120 00 Praha 2, Česká republika, [email protected], +420602615953
Specifications can be changed without notice. Images are for illustrative purposes only.
