Olympia TB 1280

The Olympia TB 1280 thermal binder binds up to 200 sheets of paper into a thermal cover with a maximum thickness of 20mm. It's equipped with overheating protection and automatically shuts off after 90 minutes of inactivity. When the device is not in use and the cooling section is retracted, the opening is protected by a cover that prevents dust from reaching the heating element. Thanks to its visual and audible signals, it's very easy to use and also highly resistant to errors. When you switch on the device, the red Power light comes on and the thermal binder automatically starts to heat up. After approximately 3 minutes of heating, the Bind light will stop flashing and turn green. The Olympia TB 1280 will beep, letting you know it's ready to use.

The Olympia TB 1280 is designed for A4 paper

Once the Olympia TB 1280 thermal binder is ready to use, insert the sheets of paper into the thermal binding cover, pull out the sliding cooling section and place the cover with the papers into the opening, closed side down. Then press the Counter button to activate the binding process, which takes about a minute. When the process is complete, the device will emit 3 audible beeps and the Bind light will turn green. Then place the cover with the papers into the cooling rack at the back and leave it to cool for at least 10 minutes. The Olympia TB 1280 thermal binder is designed for A4 paper.