Dobrý den, proč píšete, že je kompatibilní s Android, když podle stránky výrobce má být schopen přehrávat i Applovský ALAC? Bude fungovat s Iphonem?
SHANLING H7
Headphone Amp - wireless, power 1300 mW, frequencies from 20 to 40000 Hz, IN USB-C connector, coaxial and micro USB, OUT jack 3.5 mm, 6.3 mm mono jack, RCA, jack 4.4 mm and jack 2.5 mm, bass boost switch, the gain switch, the volume wheel, display and DAC functions, Android compatible, dimensions 142 × 85 × 25 mm (H×W×D), weight 352 g
Show full description
918.01 €
Warranty 24 months
Code:
SHL004c4
Producer's Website:
SHANLING H7
918.01 €
In stock 1 pcs at the supplier's
Buy
SHANLING H7
The Shanling H7 is one of the first devices to implement a brand new converter circuit designed by AKM. It consists of a pair of chips, the AK4499EX DAC chip and the AK4191EQ Delta-Sigma modulator. As one of the few portable amplifiers available, the H7 also offers direct lossless music playback straight from its microSD slot. It also features the third-generation XMOS XU316 chipset, which ensures first-class digital input processing and support for high-quality PCM, DCD, and MQA files. For maximum convenience, the amplifier supports Bluetooth 5.0 reception.
Key features of the SHANLING H7 headphone amplifier
- Consists of a pair of chips: the AK4499EX DAC chip and the AK4191EQ Delta-Sigma modulator
- Direct lossless music playback from the microSD slot
- Features the third-generation XMOS XU316 chipset
- Supports Bluetooth 5.0 reception
- Three headphone outputs and three gain levels
- Very low noise floor
A practical solution on the go
The H7 offers three headphone outputs and three gain levels. When using the balanced output on the high gain setting, it achieves a power output of up to 1.3W, which is enough for the vast majority of audiophile headphones. On the other hand, it has a very low noise floor, so at the low gain setting, you can also use the H7 with very sensitive headphones. The device contains two standard 18650 batteries with a total capacity of 6800mAh. Combined with a dedicated PMU chip for better power management, it offers plenty of capacity for practical use and extends battery life.
THD+N:
RCA output: 0.0006%
Unbalanced: 0.0009%
Balanced: 0.0007%
Dynamic range:
RCA output: 121dB
Unbalanced: 121dB
Balanced: 123dB
Signal-to-noise ratio:
RCA output: 121dB
Unbalanced: 121dB
Balanced: 123dB
Output impedance:
RCA output: 47k ohm
Unbalanced: <1 ohm
Balanced: <1 ohm
Channel separation:
Unbalanced: 75dB and 32 ohm
Balanced: 115dB and 32 ohm
Noise:
Unbalanced: >113dB
Balanced: >111dB
Technical specification:
Display: 1.44-inch display
System: Open Android 10 Audio formats: DSD (.iso, .dsf, .dff), ISO, DXD, APE, FLAC, WAV, AIFF, AIF, DTS, MP3, WMA, AAC, OGG, ALAC, MP2, M4A, AC3, M3U, M3U8, OPUS
Maximum playback quality: 768kHz / 32-bit, DSD512, 8× MQA
MicroSD card: up to 2TB
Digital filters: 6 preset filters
Battery: 2× 18650
Battery capacity: 6800mAh, up to 10 hours of playback
Bluetooth codecs: LDAC, AAC, SBC
Frequency range: 20Hz–40kHz
Unbalanced output power: up to 450mW and 32 ohm
Balanced output power: up to 1300mW and 32 ohm
Specifications
Inputs
Outputs
Features
Compatibility
Output power
Inputs and outputs
Inputs
Outputs
Features
Features
Compatibility
Output power
Signal-to-noise ratio (SNR)
Supported formats
Frequency range
Frequency range from
Frequency range to
Power supply
Battery life per charge
Battery size
Power supply
Battery type
Number of batteries
Connection
Connection
Dimensions and weight
Width
Height
Depth
Weight
More Specifications
S.I.C. spol s r.o., Na Folimance 2155/15 120 00 Praha 2, [email protected], +420 222 505 045
Note:
Specifications can be changed without notice. Images are for illustrative purposes only.
