NIKWAX Softshell Proof Spray-on 300 ml

4.4 20 ratings
Impregnation for softshell clothing, increases water resistance and at the same time provides optimal breathability of materials, suitable for materials: Windstopper, Windbloc, Scholler, Polartec and others
  14.15 €
Quantity discount
Discount already from 2 pcs, up to 6%
Warranty 24 months Code:  PPR1238
NIKWAX Softshell Proof Spray-on 300 ml 14.15 € In stock > 10 pcs at the supplier's
Buy

NIKWAX Softshell Proof Spray-on 300 ml

NIKWAX Softshell Proof Spray-on is an impregnation designed for softshell clothing. The impregnation increases the water resistance of the material while maintaining its breathability. It is suitable for Gore Windstopper, Windbloc, Schoeller, Polartec and all other softshell fabrics. NIKWAX Softshell Proof Spray-on is supplied in a container with a mechanical sprayer, which ensures easy application and allows targeted treatment of the most stressed parts of the garment. It is recommended for products with absorbent lining.

NIKWAX Softshell Proof Spray-on 300 ml

Key Features of NIKWAX Softshell Proof Spray-on

  • Impregnating spray for softshell clothing
  • NIKWAX Softshell Proof Spray-on impregnation increases the water resistance of clothing
  • Does not reduce the breathability of the material
  • Suitable for materials such as Gore Windstopper, Windbloc, Schoeller or Polartec
  • Easy to use NIKWAX Softshell Proof Spray-on using a spray bottle
  • Recommended for clothes with absorbent lining

Instructions for use:
For best results, remove all parts not suitable for washing and wash in Nikwax TechWash in a separate wash cycle before impregnating. There is no need to pre-dry the garments. Shake well before use. Respect the symbols on the product.

Applications:
1. Spread clean wet clothing evenly.
2. When applying, hold the bottle approximately 15 cm from the treated garment.
3. Apply evenly to the outside of the garment.
4. Allow to absorb and after two minutes remove excess with a wet cloth.
5. Check carefully that you have not missed any place on the garment being treated.

Drying:
Leave to hang freely (check after a few minutes and remove excess with a wet cloth) or tumble dry at a low temperature if the symbols on the garment allow it.

Quantity needed:
The content of 300 ml is sufficient to impregnate 1-2 pieces, depending on the condition of the garments to be treated.

Specifications

Suitable for
Textile
Usage
Apparel
Features
Anti-moisture, Does not affect breathability
Protection from
Moisture, Weathering
Design
Spray

Usage

Suitable for
Textile
Usage
Apparel

Features

Features
Anti-moisture, Does not affect breathability
Protection from
Moisture, Weathering
Design
Spray
Application
Spraying
Volume
300 ml (0.3 l)
More Specifications
Note:

Specifications can be changed without notice. Images are for illustrative purposes only.

There are no posts in this discussion.
Accessories for NIKWAX Softshell Proof Spray-on 300 ml