Axial SCX10 III Base Camp 4WD 1:10 RTR grey
Axial SCX10 III Base Camp 4WD 1:10 RTR grey
RC model of Axial SCX10 III Base Camp 4WD in 1:10 scale with 4×4 drive is designed for all fans of off-road driving, obstacle crossing and rock trials, The model offers top driving characteristics without the need for additional features. The SCX10 III chassis has been stripped of other superstructures to leave only a pure chassis with excellent handling characteristics. A single-speed gearbox is used. The bodywork is fully finished and painted, but contains fewer details to keep the price affordable. The Axial SCX10 III Base Camp 4WD is factory assembled and features a powerful Tazer 540 35T DC motor powered by a 40A Firma controller. The control is fitted with a waterproof servo with metal gears. The SLT3 RC kit with reliable 2.4GHz transmission and all the settings you need. To operate the model, you only need a 2S-3S LiPo power battery with EC3 or IC3 connector and a suitable charger.
1:10
Scale
300 m
Transmission range
7 km/h
Maximum speed
Up to 90 minutes
Operation time
Outdoor
Retrieved from
Key features of RC car Axial SCX10 III Base Camp 4WD 1:10, RTR, grey
- Robust and durable SCX10 III chassis with steel profiles
- All-new LCXU single-speed gearbox with ball bearings and metal gears
- Licensed Black Rhino one-piece wheels and licensed Falken Wildpeak tyres increase ground clearance
- Adjustable and oil-filled shock absorbers with aluminium body
- Transmitter SLT3 2,4 GHz with receiver SR315 2,4 GHz with SLT and DMSR
- Powerful Dynamite 540 35T DC motor and 40A speed controller
- Waterproof servo steering with metal gears and torque of 15 kg/cm
- Lightweight bodywork
- Licensed Demello off-road bumpers
Steel frame and advanced suspension for a stable ride
The model features a chassis with C-shaped steel profiles that minimize chassis flexing and twisting. The chassis is fully equipped with ball bearings. The gears are metal on the drivetrain, thus achieving higher durability. Suspension is provided by oil-filled aluminium shock absorbers. The model is fitted with licensed Black Rhino wheels with Falken Wildpeak tyres in R35 compound combining optimum grip and durability.
New single-speed transmission and optimised geometry
The new LCXU single-speed gearbox with metal gearing and low centre of gravity was chosen for the model. The housing is completely fitted with ball bearings to ensure smooth operation and long life. The internal gears can be switched to use a tuning wheelbase conversion kit. The geometry of the SCX10 III Base Camp 4WD front suspension is optimized to reduce the bump steer effect, i.e. the axle turning when crossing obstacles. The four-link rear suspension minimises twisting caused by torque under acceleration.
Metal couplers and oil dampers
All couplers on the model are metal, the end caps are on stainless steel ball studs for long life. The aluminium shock absorbers are oil filled for authentic performance and real car-like handling. The spring preload can be easily adjusted using the nut. For better performance, the shock absorbers are larger, or with a higher shock volume.
Three channel RC kit
The SLT3 transmitters and SR315 receiver provide reliable control in the 2.4 GHz band. All basic functions can be set on the transmitter, i.e. throttle trim and steering, max. steering channel deflections, reversal or motor power limiter 50%, 75% and 100%. The free third channel hides the potential for upgrades, you can add control of lights, winch etc. The receiver includes both SLT and DMSR protocols, making it possible to upgrade to a Spektrum universal display transmitter.
What is needed and accessories for normal operation
To put the model into operation, it is necessary to add a drive battery and an adequate charger for the drive battery. For normal riding, a 2-3 cell LiPo battery with a capacity of 5000 mAh fitted with an IC3/EC3 connector is recommended. For normal operation of the RC car you need tire glue and silicone oil for the shock absorbers and a set of Allen screwdrivers. Tyre adhesive is used to glue the tyres to the rim of the disc. Always ensure that the tyre is firmly glued to the wheel rim around its entire circumference! If the tyre is not glued all the way around, the tyre may tear. The tyre adhesive has a special formulation that is able to bond materials such as rubber or nylon, while at the same time making the adhesive flexible once it has set. Do not use regular instant glue - this is not flexible once it has set and cracks in the tyre will gradually form around the rims! For routine maintenance, screw adhesive is required. Screws screwed into metal material (e.g. screws in the motor, worm in the pinion) must be secured with this adhesive against spontaneous loosening.
Features and technical specifications
- Metal chassis C - profiles
- 4WD
- DC motor 540 35T
- Rhino front and rear wheels with 4.7" Falken Wildpeak tyres, 12 mm wheel carrier, dimensions 116 × 47 mm
- Pinion 14T
- Main wheel 52T
- Oil dampers
- Multi-element suspension
- Fixed differentials (transfer case)
- Forward/brake/reverse function
- Chassis clearance 63.5 mm
- The model runs on a 7.4 V 5000 mAh LiPo battery
- Wheelbase 312 mm
- Weight 3.4 kg
- Battery compartment 139 × 47 × 25 mm
- Maximum speed about 7 km/h with 7.4 V LiPo battery and factory gear
Package contents
- Assembled RC model Axial SCX10 III Base Camp
- Axial Slickrock 540 35T DC motor
- Speed controller Spektrum Firma 40A
- Servo Spektrum S614 MG with metal gears and 15 kg thrust. cm
- Receiver Spektrum SR515 DSMR/SLT
- Transmitter Spektrum SLT3 2,4 GHz
- 4 x AA pencil batteries for transmitter
- Cross wrench for wheels
- Pistons for shock absorbers
- Instructions in Czech and manual in English, German, French and Italian
Specifications
Age and intended use
RC model type
Scale
Features
Advanced
Control type
Colour
Dimensions
Model power supply
Controller power supply
Battery
Horizon Hobby GmbH, Hanskampring 9, D-22885 Barsbüttel, +49-40-822167800, [email protected]
Specifications can be changed without notice. Images are for illustrative purposes only.
