Catalogue

Traxxas Stampede 1:10 BL-2s RTR blue

Remote Control Car - racing and monster truck, dimensions 24.1 × 32.4 × 42.8 (H×W×D), suitable for outdoors, electric brushless motor, 2 wheel drive, oil dampers, proportional control, Suspension chassis and differential, maximum speed 64 km/h, transmission range 80 m, car powered by Li-Pol battery, steering wheel control, 4 AA batteries (not included), 2 driver channels, operating time up to 15 min
  308.19 €
Traxxas Stampede 1:10 BL-2s RTR blue 308.19 € In stock 1 pcs at the supplier's
Buy

Traxxas Stampede 1:10 BL-2s RTR blue

The blue Stampede 1:10 RC Monster Truck is powered by a brushless motor and BL-2S controller for 2S LiPo batteries. The brushless drive system delivers more brutal acceleration, a long service life, and a top speed of up to 64km/h. In addition, the model comes factory-fitted with an Extreme Heavy Duty kit for high durability and an exclusive clipless body mounting system. The model is controlled by a Traxxas TQ two-channel proportional steering wheel RC transmitter, operating in the 2.4GHz band for interference-free operation. The transmitter is powered by 4 AA cells. There is a rotary knob on the transmitter to trim the steering—so the model drives straight when the steering wheel is in the central position. The battery status in the transmitter is indicated by an LED. The throttle and steering channels on the transmitter can be reversed.

RC model scale

1:10

Scale
RC models - range

80m

Transmission Range
RC model max speed

64km/h

Maximum Speed
RC model run time

Up to 15 minutes

Operating Time
RC model usage

Outdoor

Use
Traxxas Stampede 1:10 BL-2s RTR Blue RC Car

Key Features of the Traxxas Stampede 1:10 BL-2s RTR Blue RC Car

  • Reinforced C-hubs, wheel hubs, and steering
  • Ergonomic transmitter with internal antenna
  • Sealed gearbox with reinforced motor housing
  • Solid composite chassis frame
  • Ball bearings with rubber seals
  • Quick and easy battery replacement
  • High grip on a wide range of surfaces

Construction and Driving Characteristics

The nylon chassis construction gives the Traxxas Stampede 1:10 BL-2s RTR blue RC car high strength and durability, and the model is both lightweight and agile. The rear wheels are driven by a Magnum 272 gearbox with an adjustable slipper clutch. Thanks to the motor being located behind the rear axle, high traction is guaranteed. Excellent handling characteristics are due to the precise suspension geometry, and combined with the long arm travel, you can overcome even the most demanding terrain. Despite the increased speed and acceleration compared to a DC drive, the affordable operation on 2S LiPo batteries is maintained. Control is provided by a TQ 2.4GHz transmitter with precise steering mechanics. A wide range of tuning parts, including complete replacements, is of course available.

Traxxas Stampede 1:10 BL-2s RTR Blue RC Car

Body and Motor

The brushless drive with a 3300 RPM/V motor increases speed and acceleration by up to 60% compared to other DC motor drives. Improved efficiency, high-speed ball bearings, and an internal cooling fan give the motor a long life with minimal maintenance. The factory-installed Extreme Heavy Duty suspension and drive components kit is made from durable materials. The body mounting system, using latches in the wheel arches, allows for quick and easy battery changes and a clean, clip-free appearance. The body adheres to the clipless mount over a larger area and will not crack.

Traxxas Stampede 1:10 BL-2s RTR Blue RC Car

Drivetrain and Gearbox

The chassis is made of nylon, which is filled with glass fibres for higher strength and toughness. The chassis is spatially shaped to have high rigidity. The motor with gearbox and differential is located in the rear of the model. The drive system forms a compact, enclosed unit, which makes the car a low-maintenance model. The gearbox, disc clutch, and planetary differential are enclosed in a single compact unit. The gearbox with a slipper clutch reliably transmits the engine power to the axles, and the Magnum 272™ planetary differential gearbox has gears made of hardened steel. The system requires absolutely minimal maintenance. Pinions and gears with different numbers of teeth are available, so you can fine-tune your model for both speed and technical tracks. The Revo Spec Torque Control slipper clutch ensures smooth power transfer and is adjustable. A properly set slip rate protects the drivetrain while not reducing the model's acceleration.

Traxxas Stampede 1:10 BL-2s RTR Blue RC Car
Traxxas Stampede 1:10 BL-2s RTR Blue RC Car

Suspension and Chassis

The high-travel oil-filled shock absorbers use dual X-rings for a perfect seal and flawless operation. The robust design combined with the high oil volume can absorb even hard impacts in heavy terrain. You can tune the shock absorbers to your liking by adjusting the springs and changing the oil viscosity. Thanks to the rear wheelie bar, you can enjoy riding on the rear wheels without worrying about the model tipping over. In addition, the durable nylon wheelie bar provides extra protection for the motor and gearbox. With over 10cm of ground clearance in the centre of the chassis, you can take the model to places and over obstacles that other RC cars can't handle. The Bigfoot wheels and tyres run on large 2.8" All-Star chrome wheels. The unique rubber compound of the Talon tyres has high grip on a wide range of surfaces including dirt, grass, concrete, and rocks. The standard-size digital Traxxas 2056 6.2kg.cm waterproof servo with DC motor and nylon gears has a torque of 6.2kg.cm and a speed of 0.20s/60°@ 6.0V. For water resistance, the servo box is fitted with a seal.

Three Programmable Driving Modes

The brushless Traxxas 3300kv motor of the Traxxas Stampede 1:10 BL-2s RTR blue RC car provides an ideal, affordable drive, especially for 1:10 models, with all the benefits including high performance, long life, and minimal maintenance. The motor is equipped with a Quick Connect connector for easy connection. It offers three programmable driving modes – Sport, Race, and Training. Sport mode allows forward and reverse driving, has a brake and reverse gear; Race mode offers forward driving and a brake; Training mode is set to 50% power forward and reverse and has a brake. They are easily set with a single Traxxas EZ-Set® button. The car is compatible with both LiPo and NiMH batteries. The controller with three driving modes guarantees fun for adults and children alike.

Features and Technical Specifications

  • Velineon®-ready Magnum 272™ gearbox
  • BL-2s™ waterproof electronic speed control (ESC)
  • Fully adjustable Ultra Shocks™ oil-filled shock absorbers with X-ring technology
  • Pre-glued Talon™ all-terrain tyres with foam inserts
  • Dimensions 24.1 × 32.4 × 42.8cm (H × W × L)
  • Weight 1.85kg

Package Contents

  • RC car model
  • TQ™ 2.4GHz radio system
  • Quick start guide
  • Service tools

Specifications

Compare
Usage
Everybody
Suitable for
14 years
Measure
1:10
Focus
Hobby
Use
Outdoor

Age and intended use

Usage
Everybody
Suitable for
14 years

Scale

Measure
1:10

Advanced

Operation time
15 min
Maximum speed
64 km/h
Transmission Range
80 m

Control type

Control type
Steering wheel
Number of controller channels
2

Colour

Colour
Black, Blue

Dimensions

Length
42.8 cm
Width
32.4 cm
Height
24.1 cm

Included

Included
Controller, Instructions, Tool set

Model power supply

Model power supply type
Rechargeable battery
Batteries included
No
Number of batteries
1 pc(s)
Battery type
Li-Pol

Controller power supply

Controller power supply type
Battery
Controller battery type
AA
Batteries included
No
Number of batteries
4 pc(s)

Hooking parameter

Battery

Must additionally purchase AA batteries
Yes
Battery type
AA
Number of batteries
4 pc(s)
More Specifications

ASTRA, spol. s r.o., Prakšická 2589, 688 01 Uherský Brod, +420 572 619 619, [email protected]

Note:

Specifications can be changed without notice. Images are for illustrative purposes only.

There are no posts in this discussion.
Accessories for Traxxas Stampede 1:10 BL-2s RTR blue
Try our cookies Alza.cz a. s., Company identification number 27082440, use cookies and other data to ensure the proper functioning of the website and, with your consent, also, among other things, to personalize advertising and the content of our websites. By clicking on the “I understand“ button, you agree to the use of cookies and the transfer of data regarding the behavior on the website for displaying targeted advertising on social networks and advertising networks on other websites.
Detailed settings
Alzak icon
P-DC1-WEB18