Traxxas Stampede 1:10 BL-2s RTR green
- Help and manuals
- Suitable for
- Specifications
- Photos & Videos 5
- Alternatives 8
- Accessories and suggested products
Traxxas Stampede 1:10 BL-2s RTR green
The green Stampede 1:10 Monster Truck RC car model is powered by a BL-2S brushless motor and controller for 2S LiPo battery power. The brushless drive system provides more brutal acceleration, a long service life, and a top speed of up to 64km/h. In addition, the model comes factory-equipped with the Extreme Heavy Duty upgrade kit for high durability and an exclusive clipless body mounting system. The model is controlled by a two-channel Traxxas TQ proportional steering wheel RC transmitter operating in the 2.4GHz band for interference-free operation. The transmitter is powered by 4 AA batteries. On the transmitter, there is a rotary knob used to trim the steering—so that the model runs straight when the steering wheel is in the central position. The battery status in the transmitter is indicated by an LED. The throttle and steering channels on the transmitter can be reversed.
1:10
Scale
80m
Transmission range
64km/h
Maximum speed
Up to 15 minutes
Operating time
Outdoor
Use
Key Features of the Traxxas Stampede 1:10 BL-2s RTR Green RC Car
- Reinforced C-hubs, wheel hubs, and steering
- Ergonomic transmitter with internal antenna
- Sealed gearbox with reinforced motor housing
- Robust composite chassis frame
- Ball bearings with rubber seals
- Quick and easy battery replacement
- High grip on a wide range of surfaces
Construction and Driving Characteristics
The nylon chassis construction gives the green Traxxas Stampede 1:10 BL-2s RTR RC car high strength and durability, while the model is also lightweight and agile. The rear wheels are driven by a Magnum 272 gearbox with an adjustable slipper clutch. The motor's placement behind the rear axle ensures high traction. Excellent handling is achieved through precise suspension geometry, and combined with long-travel arms, you can tackle even more challenging terrain. Despite the increased speed and acceleration compared to a DC drive, the affordable operation on 2S LiPo batteries is maintained. Control is provided by the TQ 2.4 GHz transmitter with precise steering mechanics. Of course, a wide range of tuning parts is available, including complete replacement parts.
Body and Motor
The brushless drive with a 3300 RPM/V motor increases speed and acceleration by up to 60% compared to other drives with a DC motor. Improved efficiency, high-speed ball bearings, and an internal cooling fan give the motor a long service life with minimal maintenance. The factory-installed Extreme Heavy Duty suspension and drivetrain components are made from durable materials. The clipless body mounting system, with tabs in the wheel wells, allows for quick and easy battery changes and a clean look for the model, uninterrupted by clips. The body fits more snugly against the clipless mount over a larger area and will not crack.
Drive and Gearbox
The model's chassis is made of nylon filled with glass fibres for increased strength and toughness. The chassis is spatially moulded for high rigidity. The motor, gearbox, and differential are located in the rear of the model. The drive system forms a compact, sealed unit, which makes the car a low-maintenance model. The gearbox, disc clutch, and planetary differential are enclosed in a single compact unit. The gearbox with a slipper clutch reliably transfers the motor's power to the axles, and the Magnum 272™ planetary differential has gears made of hardened steel. The system requires absolutely minimal maintenance. Pinions and gears with different tooth counts are available, so you can fine-tune the model for both speed and technical tracks. Slipper Clutch The Revo Spec Torque Control slipper clutch ensures a smooth power transfer and is adjustable. A correctly set slip rate protects the drivetrain without reducing the model's acceleration.
Suspension and Chassis
The high-travel oil-filled shocks use dual X-rings for a perfect seal and flawless operation. The robust design combined with a high volume of oil can absorb even hard impacts on difficult terrain. You can tune the shocks to your liking by adjusting the springs and changing the oil viscosity. Thanks to the rear wheelie bar, you can enjoy driving on the rear wheels without worrying about the model flipping over. The durable nylon wheelie bar mount also provides extra protection for the motor and gearbox. With over 10cm of ground clearance at the centre of the chassis, you can take the model to places and overcome obstacles that other RC cars cannot handle. The Bigfoot wheels and tyres run on large 2.8" All-Star chrome wheels. The unique rubber compound of the Talon tyres provides high grip on a wide range of surfaces, including dirt, grass, concrete, and rocks. The standard-size Traxxas 2056 6.2kg·cm waterproof digital servo with a DC motor and nylon gears has a torque of 6.2kg·cm and a speed of 0.20s/60°@ 6.0V. For water resistance, the servo case is fitted with a seal.
Three Programmable Driving Modes
The brushless motor of the green Traxxas Stampede 1:10 BL-2s RTR RC car, the Traxxas 3300kv, provides an ideal, affordable drive, especially for 1:10 models, with all the benefits including high performance, long life, and minimal maintenance. The motor is equipped with a Quick Connect connector for easy plugging in. It offers three programmable driving modes – Sport, Race, and Training. Sport mode allows for forward, reverse, brake, and reverse driving; Race mode offers forward and brake; and Training mode is set to 50% power for both forward and reverse, and has a brake. They are easily set with a single Traxxas EZ-Set® button. The car is compatible with both LiPo and NiMH batteries. The controller with three driving modes guarantees fun for adults and children alike.
Features and Technical Specifications
- Velineon®-ready Magnum 272™ gearbox
- BL-2s™ waterproof electronic speed control (ESC)
- Fully adjustable Ultra Shocks™ oil-filled shocks with X-ring technology
- Pre-glued Talon™ all-terrain tyres with foam inserts
- Dimensions 24.1 × 32.4 × 42.8cm (H × W × L)
- Weight 1.85kg
Package Contents
- RC car model
- TQ™ 2.4GHz radio system
- Quick Start Guide
- Maintenance tools
Specifications
Age and intended use
Scale
Features
Advanced
Control type
Colour
Dimensions
Included
Model power supply
Controller power supply
Hooking parameter
Battery
ASTRA, spol. s r.o., Prakšická 2589, 688 01 Uherský Brod, +420 572 619 619, [email protected]
Specifications can be changed without notice. Images are for illustrative purposes only.
