Catalogue

Traxxas Stampede 1:10 BL-2s RTR pink

Remote Control Car - racing and monster truck, dimensions 24.1 × 32.4 × 42.8 (H×W×D), suitable for outdoors, electric brushless motor, 2 wheel drive, oil dampers, proportional control, Suspension chassis and differential, maximum speed 64 km/h, transmission range 80 m, car powered by Li-Pol battery, steering wheel control, 4 AA batteries (not included), 2 driver channels, operating time up to 15 min
  308.69 €
Traxxas Stampede 1:10 BL-2s RTR pink 308.69 € In stock > 5 pcs at the supplier's
Buy

Traxxas Stampede 1:10 BL-2s RTR pink

Pink RC model car Stampede 1:10 Monster Truck is powered by brushless motor and BL-2S controller for 2S LiPo batteries. The alternating drive system delivers more brutal acceleration, long life and a top speed of up to 64 km/h. In addition, the model is factory equipped with the Extreme Heavy Duty kit for high durability and an exclusive, no-spoke body clamping system. The model is controlled by the Traxxas TQ two-channel proportional steering wheel RC transmitter, operating in the 2.4 GHz band - interference-free operation. The transmitter is powered by 4 AA cells. There is a knob on the transmitter that is used to trim the steering - to make the model go straight when the steering wheel is in the centre position. The battery level in the transmitter is indicated by an LED. The reverse on the throttle and steering channel can be set on the transmitter.

rc model scale

1:10

Scale
RC models-range

80 m

Transmission range
rc model max speed

64 km/h

Maximum speed
rc model endurance

Up to 15 minutes

Operation time
rc usage model

Outdoor

Retrieved from
RC car Traxxas Stampede 1:10 BL-2s RTR pink

Key features of the pink RC car Traxxas Stampede 1:10 BL-2s RTR

  • Reinforced C-brackets, wheel hubs and steering
  • Ergonomic transmitter with internal antenna
  • Sealed gearbox with reinforced engine cover
  • Solid composite chassis frame
  • Ball bearings with rubber seals
  • Quick and easy battery change
  • High adhesion on a wide range of surfaces

Design and handling characteristics

The nylon chassis construction gives the Traxxas Stampede 1:10 BL-2s RTR a high strength, durable and lightweight and agile model. The Magnum 272 transmission with adjustable friction clutch is used to drive the rear wheels. High traction is ensured by placing the engine behind the rear axle. The excellent handling characteristics are due to the precise suspension geometry and, combined with the long arm travel, you can overcome even the toughest terrain. Despite the increased speed and acceleration compared to DC drive, affordable operation on 2S LiPo batteries is maintained. Control is provided by a TQ 2.4 GHz transmitter with precision steering mechanics. There is of course a wide range of tuning parts available, including complete replacements.

RC car Traxxas Stampede 1:10 BL-2s RTR pink

Bodywork and engine

AC drive with 3300 rpm/V motor increases speed and acceleration up to 60% compared to other DC motor drives. Improved efficiency, high-speed ball bearings and an internal cooling fan give the motor long life with minimal maintenance. The factory-installed Extreme Heavy Duty suspension and drive kit is made of durable materials. The system of attaching the bodywork by means of beaks in the wheel arches allows quick and easy battery replacement and the clean look of the model is not disturbed by clips. Bodywork Adjacent to a clipless holder with more surface area and it won't crack.

RC car Traxxas Stampede 1:10 BL-2s RTR pink

Drive and transmission

The chassis is made of nylon, which is filled with fiberglass for increased strength and toughness. The chassis is spatially shaped to have high rigidity. The engine with gearbox and differential is located at the rear of the model. The powertrain forms a compact, closed unit, making the car an unpretentious model. The gearbox, disc clutch and planetary differential are enclosed in one compact unit. The friction clutch transmission reliably transfers engine power to the axles, and the Magnum 272™ planetary differential gearbox has gears made of hardened steel. The system requires absolutely minimal maintenance. Pinions and gears with different numbers of teeth are available, so you can fine-tune your model for both speed and technical tracks. Friction Clutch The Revo Spec Torque Control friction clutch provides smooth power transfer and is adjustable. A properly adjusted slip rate protects the drivetrain while not reducing acceleration.

RC car Traxxas Stampede 1:10 BL-2s RTR pink
RC car Traxxas Stampede 1:10 BL-2s RTR pink

Suspension and chassis

High lift oil dampers use dual X-rings for perfect sealing and perfect operation. Robust design combined with high oil volume can absorb even hard impacts in difficult terrain. You can tune the shock absorbers to your liking by adjusting the springs and changing the oil viscosity. Thanks to the rear rail with Wheelie wheels, you can enjoy riding on the rear wheels without worrying about tipping the model over. The durable nylon wheel holder also provides extra protection for the motor and gearbox. With more than 10 cm of ground clearance in the centre of the chassis, you can take the model to places and overcome obstacles that other RC cars can't. Bigfoot wheels and tires ride on large chrome All-Star 2.8" wheels. Talon's unique rubber compound has high grip on a wide range of surfaces including dirt, grass, concrete and rocks. Standard size Traxxas servo 2056 6,2 kg digital servo. cm waterproof with DC motor and nylon gears has a torque of 6.2 kg. cm and a speed of 0.20 s/60°@ 6.0 V. The servo box is fitted with a gasket for water resistance.

Three programmable driving modes

Brushless motor of the pink RC car Traxxas Stampede 1 : 10 BL-2s RTR Traxxas 3300kv provides an ideal affordable drive especially for 1 : 10 with all the advantages of high performance, long life and minimal maintenance. The motor is equipped with a Quick Connect connector for easy connection. It offers three programmable riding modes - sport, race and training. Sport mode allows forward, reverse, has a brake and reverse, Race mode offers forward and brake, Training mode is set to 50% power forward and reverse and has a brake. They are easily set up with a single Traxxas EZ-Set® button. The car is compatible with both LiPo and NiMH batteries. The controller with three driving modes guarantees fun for adults and children.

Features and technical specifications

  • Velineon®-ready Magnum 272™ transmission
  • BL-2s™ waterproof speed controller (ESC)
  • Fully adjustable Ultra Shocks™ oil shocks with X-ring technology
  • Pre-glued Talon™ off-road tyres with foam inserts
  • Dimensions 24.1 × 32.4 × 42.8 cm (h × w × d)
  • Weight 1.85 kg

Package contents

  • RC model car
  • TQ™ 2.4 GHz radio system
  • Quick Guide
  • Service tools

Specifications

Compare
Usage
Everybody
Suitable for
14 years
Measure
1:10
Focus
Hobby
Use
Outdoor

Age and intended use

Usage
Everybody
Suitable for
14 years

Scale

Measure
1:10

Advanced

Operation time
15 min
Maximum speed
64 km/h
Transmission Range
80 m

Control type

Control type
Steering wheel
Number of controller channels
2

Colour

Colour
Black, Pink

Dimensions

Length
42.8 cm
Width
32.4 cm
Height
24.1 cm

Included

Included
Controller, Instructions, Tool set

Model power supply

Model power supply type
Rechargeable battery
Batteries included
No
Number of batteries
1 pc(s)
Battery type
Li-Pol

Controller power supply

Controller power supply type
Battery
Controller battery type
AA
Batteries included
No
Number of batteries
4 pc(s)

Hooking parameter

Battery

Must additionally purchase AA batteries
Yes
Battery type
AA
Number of batteries
4 pc(s)
More Specifications

ASTRA, spol. s r.o., Prakšická 2589, 688 01 Uherský Brod, +420 572 619 619, [email protected]

Note:

Specifications can be changed without notice. Images are for illustrative purposes only.

There are no posts in this discussion.
Accessories for Traxxas Stampede 1:10 BL-2s RTR pink
Try our cookies Alza.cz a. s., Company identification number 27082440, use cookies and other data to ensure the proper functioning of the website and, with your consent, also, among other things, to personalize advertising and the content of our websites. By clicking on the “I understand“ button, you agree to the use of cookies and the transfer of data regarding the behavior on the website for displaying targeted advertising on social networks and advertising networks on other websites.
Detailed settings
Alzak icon
P-DC1-WEB32