Ubiquiti NanoStation M5

The NanoStation M5 outdoor access point features an integrated 16dBi antenna duplexer for a 5GHz band. This access point is particularly useful for Point-to-Point or Point-to-MultiPoint communication with a maximum achievable transfer rate up to 150MB/sec. Compared to the previous model, the NanoStation M5 access point has a stronger processor, clocked at 400MHz, and more memory. This makes it possible to connect more than 300 clients in this mode. It is ideal for Wireless Internet Service Provider (WISP). The NanoStation M5 has a very efficient transfer speed over longer distances. Configuration is via a secure web interface. This simple, yet comprehensive access point enables you to set details such as the input sensitivity of the receiving signal! Of course, there is QoS, traffic shaping, output power control, etc...

Specifications:

Frequency:
5.4 to 5.825GHz

Sensitivity:
-94 (6MB/sec) to -74 (54MB/sec) dBm

Antenna:
2x 16dBi

Chipset:
Atheros

Processor:
24KC MIPS, 400MHz

Memory:
RAM: 32MB
NAND: 8MB

Interface:
LAN port: 2x RJ45 10/100 MB/sec
WiFi

Polarisation:
Horizontal / vertical

Beam angle:
45° (horizontal)
45° (vertical)

Web-based administration:
Simple and clear
AP mode, client or WDS
Traffic shaping
QoS
WAN and LAN routing and transparent bridge without NAT or with NAT
Antenna polarisation (vertical / horizontal / adaptive)
Output for an external antenna is not available
Signal strength, which corresponds to the specific signalling LED
Max. Output power: 20dBi
Encryption: WPA, WPA2, 802.1X
Default password: ubnt
Default IP: 192.168.1.20
Default name: ubnt

Other parameters:
DHCP
Modulation: OFDM
OS: AirOS
AirOS v3 also supports device in Czech
Power regulation
Transfer rate: 150MB/sec
Compliance: FCC, CE
Standards 802.11a, 802.11n
Operating mode: AP, Client, WDS
Polarisation: H/W

Operating temperature:
- 30 to 80°C.

Power:
24V, 0,5 A

Dimensions:
294 x 80 x 30mm

Weight:
0.4kg

Package includes:
Power Supply
PoE injector
2x cable ties for mast mount