Rád bych se zeptal na parametry D/A převodníku. Děkuji
YAMAHA A-S701 Silver
HiFi Amplifier - 2.0, with output of 160 W/channel, minimum impedance of 4 Ohm, 2 × speaker output, 1 × output for active subwoofer, 5 × RCA/Cinch input and 2 × output, 1 × optical input, 1 × turntable input, 1 × coaxial audio input, 1 × USB input, 1 × headphone output, remote control
Show full description
879 €
Installment calculator
4,9%
interest
from 20.22 € monthly
Warranty 24 months
Code:
YM301c2
Producer's Website:
YAMAHA A-S701 Silver
879 €
On the way > 5 pcs
Buy
YAMAHA A-S701 Silver
The AS-Sxx1 series applies a special design based on the ToP-ART (Total Purity Audio Reproduction Technology) concept for faithful sound reproduction. The direct and short audio paths are symmetrical for the left and right channels, minimizing distortion of the resulting sound or interference from transmission noise. The ART (Anti-Resonance and Tough) rigid base with a solid centre bar gives support with high rigidity and effectively dampens vibrations. The engineers' carefully considered design, the most rigorous selection of components and precise implementation must have resulted in a clear sound. The sound thus remains in its original "rawness" and, despite the rich amplification, corresponds as closely as possible to the original source.
Key features
- Rich amplification without distortion
- Special design for stable parameters
- Reliable components with a long service life
- Easy operation and sound tuning
- A variety of connectors to serve all audio devices
- Gold plated speakers and RCA terminals
For your ears
At low volumes, low and high frequency tones are naturally lost. If you don't like the authentic sound reproduced and it doesn't suit your sensibilities, there's nothing easier than correcting the sound. The front panel is dominated by the volume control and source switching, but in addition there are analogue controls to fine-tune the tonal range to your own level. It also includes a new analogue Loudness volume control, which allows you to adjust the desired volume effect via the electronic volume control. The opposite of setting is the Pure Direct button, where the signal takes the shortest path from input to output, i.e. without any adjustment. The smallest of the movable controllers is used to switch between a pair of speaker sets, or it can reproduce sound from both at the same time.
Connectors are important
With a full set of input and output connectors, the amplifier can be used for every conceivable audio-producing device. The basis of the transmission without compromising the quality is certainly the digital inputs (optical or coax), which bring the sound to the amplifier from game consoles, Full HD video players or directly from the TV. It also has 6 analogue inputs for all other electronics such as CD player, tuner, pocket player and so on. You can also connect a turntable with MM transmission to the amplifier. Enjoy listening to phonograph recordings on an amplifier with state-of-the-art technology.
Parameters and specifications:
Minimum RMS output power (8 ohms, 20 Hz-20 kHz):
100 WATTS + 100 WATTS (0.019% THD)
Max. output power (4 ohms, 1kHz, 0.7% THD):
160 W + 160 W
Max. dynamic power/channel ( 8/6/4/2 ohms):
140 / 170 / 220 / 290 W
Fade factor:
240
Connectors:
Digital input (optical/coaxial)
8× analog input
2× analog output
Subwoofer output
USB DC output
Dimensions:
435 x 151 x 387 mm
Weight:
11,2 kg
Specifications
Number of channels
Power per channel
4 Ohm, 6 Ohm, 8 Ohm
Characteristics
Inputs
Outputs
2 ×
Speaker output
Headphone output
Zone 2 (Speaker output)
Functions
Remote control
Display
Dimensions
Width
Height
Depth
Weight
Colour
Colour
More Specifications
Lukland, a.s., Na Spravedlnosti 841/27, Písek 1 39701, [email protected], www.lukland.cz
Note:
Specifications can be changed without notice. Images are for illustrative purposes only.
