NOCO Genius 10 6/12 V, 230 Ah, 10 A

Intelligent automatic charger NOCO genius 1 6/12 V with a maximum charging current of 10 A. Suitable for batteries up to 230 Ah, including LiFEPO4 lithium batteries.

It also charges fully discharged batteries (<1 V), as a maintenance charger it can be used for all capacities. The charger can be connected for any length of time without the risk of overcharging.

The integrated temperature sensor helps to control the charging process with respect to the ambient temperature (overcharging in hot weather, not recharging in cold weather).

Easy choice of charging mode, just connect to the battery, choose the mode. The charger takes care of everything.

Cell sulfation dejection, automatic desulphation mode brings batteries back to life.

Connect the charger to the battery with 2 terminals or integrated M6 lugs. The terminals have a wide clamping range and increased clamping force for better voltage transfer to the battery.

Compact dimensions, ultra safe, with protection against sparking and polarity reversal.

The charger is used to charge and maintain the voltage of the following types of batteries:

• lead acid
• maintenance-free gel
• EFB / AGM batteries for Start / Stop systems. It counteracts cyclic discharging on vehicles with the Start / Stop system.
• 12 V Lithium-Ion batteries up to 230 Ah
• super MF
• Start / Stop

The charger works in 9 modes.

• Standby - the charger does not supply any current
• 12 V charging 14.5 V | 10 A | max. 230 Ah batteries (acidic, maintenance-free, gel, Ca-Ca) - white LED is lit.
• 12 V AGM - charging 14.8 V | 10 A | max. 230 Ah batteries - white LED is lit.
• 12V Lithium - charging 14.6 V | 10 A | max 230 Ah lithium-ion batteries, including LiFePO4 - white LED is lit.
• 6 V - charging 7.25 V | 10 A | max. 230 Ah batteries (acidic, maintenance-free, gel, Ca-Ca) - white LED is lit.
• 6 V AGM Press and Hold - charging 7.25 V | 10 A | max. 230 Ah batteries (acidic, maintenance-free, gel, Ca-Ca) - lit.
• Force mode - charging batteries with voltage <1 V. Press and hold the MODE button for 5 seconds.
• 13.6 V SUPPLY Press / Hold - source 13.6 V | 10 A power supply for 12 V devices as compressors or as a power supply when replacing the battery - lights up

Parameters

• IP60 protection
• operating temperature -20 ° to 40 ° C
• Dimensions 180x92x59 mm
• Weight 1800 g