AXAGON ADSA-ST DUAL HDD

Input interface:
1x USB 3.0

Device Support:
Ports: 2x SATA 6G
Size: 2.5 "HDD, SDD, 3.5" HDD

Power:
external power adapter 12V / 2.5A

Features:
Compatible with USB 3.0, backward compatible with USB 2.0.
Support transmission speeds of 12/480/5000 Mbit / s (full / high / super speed).
Support for 2.5 "and 3.5" SATA III / II / I drives of all capacities.
Complies with Serial ATA 3.1 specification (SATA / 600), transfer rate up to 6 Gb / s.
Complies with Serial ATA 2.0 specification (SATA / 300), transmission speeds up to 3 Gb / s (300 MB / s).
Complies with Serial ATA 1.0 specification (SATA / 150), transmission speeds up to 1.5 Gb / s (150 MB / s).
Overall throughput / speed transmission station is given by the used USB 3.0 (theor. 5 Gbit / s).
Support UASP (USB Attached SCSI Protocol), and BOT (Bulk-Only Transport).
The ability to connect devices running thanks to the support Hot Plug.
Full support Plug and Play.
Support HDD Auto Spin down - off disks when idle.
Connection via large-resistant USB 3.0 Type B female connector.
USB 3.0, USB 3.0 cable type A male / USB 3.0 Type B female 70 cm included.
3 LED indicator for power and HDD dock activity discs in both pits.
Power switch.

Power:
Despite its compact external AC / DC adapter 12V - 2.5A (30W) with a cable length of 150 cm.

Additional information:
Station Dimensions 142 x 102 x 80 mm, weight 330 g.

Cloning feature on the disc:
Cloning is carried out without connecting to a computer station.
The target disk must have the same or greater capacity as a drive source, otherwise you can not start cloning.
Clone can be both hard drives and SSDs.
Cloning is started by pressing the Aperture button for min. 3 seconds.
4 LEDs indicate the progress and completion of cloning.
Speed ??cloning SSD up to 300 MB / s.
Total Time clone the disk depends on the capacity of the source disk, not on the volume of data on the disk.

Supported operating systems:
MS Windows XP / Vista / 7/8 / 8.1 / 10 and later, Windows Server 2003/2008/2012 and the more recent (all supported 32- and 64-bit versions of Windows), Mac OS X 10.x and above, Linux kernel 2.6.x higher.
Note .: The drivers are part of the supported operating systems will be installed automatically. No other driver installation is needed and are not available.

Package contains:
HDD dock, USB 3.0, 70 cm cable, power adapter, multilingual manual ENG / CZ / DE / ESP / FR / HU / IT / PL / RO / RU / SK / BG