JONNESWAY
We can deliver JONNESWAY products on the same day! Most products are in stock, so you don't have to wait. Place your order from the comfort of your home and have it delivered to your address, to an AlzaBox, or to one of our stores. Why shop anywhere else but on Alza.cz?
Continue
65
Results
Car Mechanic Tools - extra long, blade length 90 mm, sharpened part 50 mm, for cutting even in hard-to-reach places
Car Mechanic Tools - max. cutting thickness: steel 1.4 mm, speed without load: 3200 bpm, working pressure: 6,2 bar, air connection: 1/4" GW, power supply: 10 mm, average air consumption: 250 l/min, length: 210 mm, weight: 1kg
Hammer - head material steel, flat striking face, shaft material rubber, rubber-coated
Puller - McPherson spring removal jig 300 mm Jonnesway AE320044, working range is up to 300 mm, facilitates removal of the McPherson suspension spring, screw-tightened locking latch prevents accidental slipping, a solid product from a reputable manufacturer, designed for professional use
Car Mechanic Tools - 3/4" socket / socket wrench for XZN M18 hubs, for VAG vehicles - JONNESWAY AN010202, socket (walnut) for removing rear axle hubs from Volkswagen and Audi (Octavia 2, Golf, Jetta and many others), professional quality, forged from chrome-molybdenum steel, technical parameters of the head: Profile: XZN ("triple square"), head size: M18, guide square: 3/4", head type: plug, head length: 105 mm, length of the countersunk part of the head: 55 mm, material: Cr-Mo steel, also suitable for impact tools, groove and hole for retaining ring and ball, replaces OEM special tool T10162
Car Mechanic Tools - professional equipment for crimping thin-walled steel, aluminium and copper hoses with diameters of 3/16" (4, 75mm) and 1/4" (6mm), SAE system, the device is designed for connecting hoses externally, internally, EQUIPMENT - Press - Handle - 2-piece punch 3/16" (4, 75 mm) - 2-piece 1/4" (6mm) punch - 3/16" (4, 75mm) outside-inside- Punch 1/4" (6 mm), external-internal- pressure roller punch
Puller for bearings - manual, double arm, length 380 mm, span 8 - 32 mm, weight 1 kg
Puller - hand-held, double arm, length 160 mm, weight 2,67 kg
Puller - manual, two-armed, length 155 mm, span 150 mm, weight 1,1 kg
Car Mechanic Tools - fixture for mounting and dismounting ohc valves, valve spring compression, weight:660 g, length of handle: 320 mm
Car Mechanic Tools - tester to check the functionality of the seals under the engine head, to diagnose a cracked engine head, a cracked engine block or a damaged head gasket, the instrument allows easy diagnosis and quick damage detection, The principle of operation of the instrument is based on the measurement of the co2 content in the cooling system, the reaction liquid in the tester chamber reacts with the gases contained in the cooling system, and if the co2 concentration is elevated, the liquid changes colour, dual chamber design (with filter between chambers)
Torque Wrench - torque from 40 to 200 Nm, accuracy ± 3%, ISO 6789 certified, 1/2" square, overall length 517 mm
Car Mechanic Tools - cutting machine, for shortening pipes, for copper pipes with a diameter of 4-28 mm, with a knife for aligning sharp edges, silver and black colour, weight 300 g
Torque Wrench - mechanical, ratchet, torque from 20 to 100 Nm, accuracy ± 4%, ISO 6789 certification, switching operation, 1/2" square, overall length 458 mm, calibration protocol and ratchet head included
Torque Wrench - mechanical, ratchet, torque from 4.5 to 30 Nm, accuracy ± 4%, ISO 6789 certification, switching operation, 1/4" square, total length 350 mm, ratchet head included
Car Mechanic Tools - tapping file for metric threads, for regeneration of damaged internal and external threads, for a gradient of 0.80, 1,00, 1,25, 1,50, 1,75, 2,00, 3.00 mm
Car Mechanic Tools - honing head for drill for cylinders with internal diameter 32-89 mm, with honing stones
Oil Filter Wrench - belt, for oil filters with diameter 120 - 145 mm, weight 0,5 kg
Car Mechanic Tools - pneumatic, spiral, ferulated, Piliurethane (PU) hose, use in tyre service and industry, dimension: 8 × 12 mm, length: 10 m
Car Mechanic Tools - a tool (wrench) for removing the fuel tank nuts, range 122 - 199 mm, square for 3/8" grip, universal, for most European vehicle types, e.g. Mercedes-Benz, Audi, BMW
Locking Tool - universal jig for riveting chains in sizes from 35 to 630
Chcete doručit do České republiky? Jdi na
Alza