JONNESWAY
We can deliver JONNESWAY products on the same day! Most products are in stock, so you don't have to wait. Place your order from the comfort of your home and have it delivered to your address, to an AlzaBox, or to one of our stores. Why shop anywhere else but on Alza.cz?
Continue
68
Results
Car Mechanic Tools - tester to check the functionality of the seals under the engine head, to diagnose a cracked engine head, a cracked engine block or a damaged head gasket, the instrument allows easy diagnosis and quick damage detection, The principle of operation of the instrument is based on the measurement of the co2 content in the cooling system, the reaction liquid in the tester chamber reacts with the gases contained in the cooling system, and if the co2 concentration is elevated, the liquid changes colour, dual chamber design (with filter between chambers)
Locking Tool - fixtures for arresting distributors renault isuzu opel peugeot
Torque Wrench - torque from 40 to 200 Nm, accuracy ± 3%, ISO 6789 certified, 1/2" square, overall length 517 mm
Torque Wrench - torque from 5 to 25 Nm, accuracy ± 3%, ISO 6789 certified, 1/4" square, overall length 323 mm
Torque Wrench - torque from 4.5 to 30 Nm, accuracy ± 4%, ISO 6789 certification, 3/8" square, total length 340 mm, calibration protocol in the package
Car Battery Tester - analogue, suitable for passenger cars,
Car Mechanic Tools - Brake bleeder with 1 m hose, ending in a universal, interchangeable hose connector, Brake fluid change kit with 0.75 capacity with magnet, which prevents the container from filling with liquid, universal rubber adapter, 4 adapters with dimensions 21 - 30 mm, 24 - 32 mm, 28 - 37 mm, 32 - 41 mm, working pressure 5-8 Bar (70~110 PSI), waste container capacity 1 litre, tank capacity 0.75 litres, air consumption 160 l/min, 1/4" air connections
Car Mechanic Tools - cutting machine, for shortening pipes, for copper pipes with a diameter of 4-28 mm, with a knife for aligning sharp edges, silver and black colour, weight 300 g
Car Mechanic Tools - Special brake hose clamps, Used to clamp the hoses to prevent fluid leaks
Car Mechanic Tools - pneumatic carving machine for carving glued car windows, three blades of size 30 mm, 35 mm and 57 mm, in a plastic case, compressed air drive, speed 22000 beats. /min, working pressure 6.2 bar, ¼" air connection, 10 mm supply hose, air consumption 260 l/min, length 120 mm, weight 1,2 kg
Drive Socket - Punch, elongated (deep), material chrome molybdenum steel (CR-Mo), phosphated, inner profile 6 edges, Guide square 1/2", head height 80 mm, groove and hole for retaining ring and ball, set of 11 pieces of sockets in size 10 - 24 mm, plastic case
Ratchet - double-sided socket wrench with direction switch, designed for assembly and disassembly of scaffolding, long arm for higher torque, sharpened tip for soldering and separating elements, length 315 mm, weight 450 g
Torque Wrench - 1/4" square, range 3-30 Nm, accuracy ±2 %/±3 %, audible and optical signalling, clear display, button control, units Nm/ft-lb/in-lb/kg-m, suitable for left and right hand thread, supplied in a plastic cassette with calibration certificate, power supply 2× AAA (not included)
Torque Wrench - 1/2" square, designed for 1/2" T27200N wrenches, T27340N, contains inserts, a square with teeth, latches, springs, switch lever and screws
Car Mechanic Tools - for use in tyre service and industry, dimension: 6.5 × 10 mm, length: 10m
Chcete doručit do České republiky? Jdi na
Alza